Page 36 / 73 Scroll up to view Page 31 - 35
36
D-Link DSL-2740R
Section 3 - Configuration
WIRELESS SECURITY MODE - WEP
WEP (Wireless Encryption Protocol)
encryption can be enabled for security
and privacy. WEP encrypts the data portion of each frame transmitted from
the wireless adapter using one of the predefined keys. The router offers 64 or
128 bit encryption with four keys available.
Select
WEP Key Length
from the drop-down menu. (
128 bit
is stronger than
64 bit
.)
Specify the encryption key from the
Current Network Key
drop-down menu.
Enter up to four keys into the
WEP Key
fields.
Select the
Authentication
type from the drop-down menu. (
Shared
is better
than
Open.
)
Click on
Apply Settings
to apply settings.
Page 37 / 73
37
D-Link DSL-2740R
Section 3 - Configuration
WIRELESS SECURITY MODE – WPA-Personal
Use
WPA
or
WPA2
mode to achieve a balance of strong security
and best compatibility. This mode uses WPA for legacy clients while
maintaining a higher level of security with stations that are WPA2
capable. Also the strongest cipher that the client supports will be used.
For best security, use
WPA2 Only
mode. This mode uses AES (CCMP)
cipher and legacy stations are not allowed access with WPA security.
For maximum compatibility, use
WPA Only
. This mode uses TKIP
cipher. Some gaming and legacy devices work only in this mode.
According to the WiFi Alliance 11N specification, Wi-Fi Protected Setup is not
fully supported under WPA Only mode. We will disable your Wi-Fi Protected
Setup if you use WPA Only mode.
Select
Auto(WPA or WPA2)
or
WPA2 only
or
WPA only
on the
WPA Mode
.
Type the value in seconds on the
Group Key Update Interval
. The default value
is 1800.
Type the string on the
Pre-Shared Key
.
Click
Apply Settings
to save the configuration.
Page 38 / 73
38
D-Link DSL-2740R
Section 3 - Configuration
Local Network
You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP
service to manage the IP settings for their private network. The IP address of the router is the base address used for DHCP. In order to use the router
for DHCP on your LAN, the IP address pool used for DHCP must be compatible with the IP address of the router. The IP addresses available in the
DHCP IP address pool will change automatically if you change the IP address of the router.
To access the
Local Network
settings window, click on
Local Network
in the SETUP directory.
ROUTER SETTINGS
To change the
Router IP Address
or
Subnet Mask
, type in the desired values.
DHCP SERVER SETTINGS (OPTIONAL)
The
Enable DHCP Server
is selected by default for the router’s Ethernet
LAN interface.
Set the
DHCP IP Address Range
and the default is from 192.168.1.2
to 192.168.1.254.
The IP address pool can be up to 253 IP addresses.
Set the
DHCP Lease Time
in number of hours. The default value is 72.
If you don’t want DSL-2740R to be the DHCP server, you can enable
DHCP
relay
to pass the DHCP discover packets of the clients to another DHCP server.
Please set the DHCP server IP address in
DHCP Server IP Address
.
Page 39 / 73
39
D-Link DSL-2740R
Section 3 - Configuration
ADD/EDIT DHCP RESERVATION (OPTIONAL)
Click on the Add button under the DHCP Reservations List.
Select
Enable
to let you reserve the
IP Address
for the designated PC with
the configured MAC Address.
The
Computer Name
can help you recognize this PC with the
MAC Address
by assigning it a name like
“Father’s Laptop.”
Click on
Copy Your PC’s MAC Address
to help you get the Mac address from
the PC you are using to browse the web page.
Click on
Apply
to save the configuration.
DHCP RESERVATIONS LIST
After the DHCP reservation is saved, the
DHCP RESERVATIONS LIST
will list
the configuration.
The
NUMBER OF DYNAMIC DHCP CLIENTS
shows how many DHCP clients
(PC or Laptop) are connected to the router currently.
Click on
Save Settings
. You will be asked to reboot by a pop-up window. Click
on OK to reboot the router.
LAN SETUP
Do not turn the router off while it is rebooting.
You might need to re-configure your PC NIC settings to enter the router’s web
manager after reboot.
Page 40 / 73
40
D-Link DSL-2740R
Section 3 - Configuration
Time
The
TIME
configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you
can set the time zone that you are in and set the NTP (Network Time Protocol) Server. Daylight Saving can also be configured to automatically
adjust the time when needed.
To access the
TIME
setting window, click on the
Time and Date
button in the
SETUP
directory.
TIME
Check
Enable NTP Server
.
Select specific time server to use from the
NTP Server Used
drop-
down menu. Or, you can type the specific NTP server name.
Select your operating time zone from the
Time Zone
drop-down menu.
If you need to enable daylight saving time, just select
Enable Daylight
Saving
. Daylight saving is a period from late Spring to early Fall.
Set how many hours to change the time for Daylight saving Offset.
Configure Daylight Saving Dates
Daylight Saving time starts in the most parts of the United States on
the second Sunday of March. Each time zone in the United States
starts Daylight Saving time at 2 A.M. Thus, in the United States, you
should use March, Second, Sunday, at 2:00 A.M for the start time.
Daylight Saving time starts in the European Union on the last Sunday
of March. Thus, in the European Union, you must select March, Last,
Sunday for the start time. The time must depend on your country’s time
zone. For example, in Germany you must type 2 because Germany’s
time zone is 1 hour ahead of GMT or UTC (GMT+1). Thus, in Germany
you should use March, Last, Sunday, at 1:00 A.M for the start time.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top