Page 51 / 73 Scroll up to view Page 46 - 50
51
D-Link DSL-2740R
Section 3 - Configuration
Advanced Wireless
These options are for users who wish to change the performance of their 802.11g wireless radio from the standard settings. D-Link does not
recommend changing the factory default settings. Incorrect settings may impair the performance of your wireless radio. The default settings should
provide the best wireless radio performance in most environments.
ADVANCED WIRELESS SETTINGS
If you need to change the default behavior, please set the following
values:
Select from 20 MHz Auto 20/40 MHz on the
Channel Width
.
Select Lower or Upper on the
Control Sideband
.
Select
MCS
.
Please type the
Fragmentation Threshold
value.
Please type the
RTS Threshold
value.
Please type the
DTIM Interval
value
.
Please type the
Beacon Interval
value.
Page 52 / 73
52
D-Link DSL-2740R
Section 3 - Configuration
GUEST WIRELESS SETTINGS
Select how many SSIDs you need in
Wireless SSID Num
.
Please select
Enable Wireless Guest Network
.
Type SSID in
Guest SSID1
.
Click on
Apply Settings
to apply these settings.
Page 53 / 73
53
D-Link DSL-2740R
Section 3 - Configuration
Wi-Fi Protected Setup
Wi-Fi Protected Setup is used to easily add devices to a network using a PIN or button press. Devices must support Wi-Fi Protected Setup in order
to be configured by this method.
If the PIN changes, the new PIN will be used in following the Wi-Fi Protected Setup process. Clicking on
Cancel
will not reset the PIN.
However, if the new PIN is not saved, it will get lost when the device reboots or loses power.
WI-FI PROTECTED SETUP
Please select
Enable
or
Lock Wireless Security Settings
You also can click
Reset to Unconfigured
to reset the wireless setting.
PIN SETTINGS
Click on
Reset PIN to Default
or
Generate New PIN
to show the PIN in the
Current PIN
field.
ADD WIRELESS STATION
Please click
Add Wireless Device with WPS
to set the WPS.
Page 54 / 73
54
D-Link DSL-2740R
Section 3 - Configuration
These options are for users that wish to change the LAN settings. D-Link does not recommend changing these settings from factory default.
Changing these settings may affect the behavior of your network.
Advanced LAN
UPNP
Please select Enable UPnP when you want to have Universal Plug and Play
(UPnP) support peer-to-peer Plug and Play functionality for network devices.
MULTICAST STREAMS
Please click on
Enable Multicast Streams (IGMP)
to
let a IGMP stream pass through DSL-2740R.
WAN PING
Enable WAN Ping response by clicking
Enable WAN Ping
.
Click on
Apply Settings
to apply the settings.
Page 55 / 73
55
D-Link DSL-2740R
Section 3 - Configuration
Maintenance
Click on the
MAINTENANCE
tab to view the window buttons for various functions located in this directory.
Password
The factory default password of this router is
admin
. To help secure your network, D-Link recommends that you choose a new password.
SET PASSWORD (OPTIONAL)
Please type the
Current Password, New Password,
and
Confirm Password
.
Please click
Apply Settings
to save the settings.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top