Page 46 / 73 Scroll up to view Page 41 - 45
46
D-Link DSL-2740R
Section 3 - Configuration
IP/Mac Filter
This is the ability to set filters in the router and re-direct data through those to a single PC on your network.
SELECT IP/MAC FILTER RULE INDEX
Choose
Both, Incoming,
or
Outgoing
in
Direction
.
Type the
Source IP address, Subnet Mask
, and
Port Number
.
Type
Destination IP address, Subnet Mask
, and
Port Number
.
Choose
ICMP, TCP,
or
UDP
in
Protocol
.
Click
Save
to add the policy in the list.
Page 47 / 73
47
D-Link DSL-2740R
Section 3 - Configuration
DNS Setup
The DNS is used to resolve the DNS name to IPs. You can type the DNS name or obtain it automatically.
The Dynamic DNS feature allows you to host a server (Web, FTP, Game Server, etc.) using a domain name that you have purchased (for example:
www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing)
IP addresses. Using a DDNS service provider, your friends can just enter your host name to connect to your game server without having to know
your IP address.
To access the
DNS
setting window, click on the
DNS
button under the
ADVANCED
tab.
DNS AND DEFAULT GATEWAY
If you are using the router for DHCP service on the LAN and are
using DNS servers on the ISP’s network, check the
Obtain DNS
server address automatically
box.
If you have DNS IP addresses provided by your ISP, enter these
IP addresses in the available entry fields for the
Preferred
DNS Server
and the
Alternate DNS Server
.
Page 48 / 73
48
D-Link DSL-2740R
Section 3 - Configuration
DDNS CONFIGURATION
Please access a DDNS web server to obtain a domain name. You can
use the D-Link DDNS server at https://www.dlinkddns.com to receive
a free DDNS.
Please enable
Enable Dynamic DNS
if you want to use DDNS.
Choose which DDNS web site to use in
Server Address
.
Type the Host name which you registered with your DDNS service
provider in
Host Name
.
Type the username/password on the
Username/Password/Verify
Password
of your DDNS account.
After you have configured the DNS settings as desired, click
Apply
to
apply the settings.
Page 49 / 73
49
D-Link DSL-2740R
Section 3 - Configuration
Firewall & DMZ
The router already provides a simple firewall by virtue of the way NAT works. By default NAT does not respond to unsolicited incoming requests on
any port, thereby making your WAN invisible to Internet cyber attackers.
DMZ means Demilitarised Zone. DMZ allows computers behind the router firewall to be accessible to Internet traffic. Typically, your DMZ would
contain Web servers, FTP servers, and others.
FIREWALL SETTINGS
Enable the Firewall by clicking
Enable Firewall
.
Enable the SPI on clicking
Enable SPI
.
Enable the ALG on clicking
Enable ALG
.
Page 50 / 73
50
D-Link DSL-2740R
Section 3 - Configuration
DMZ SETTINGS
Please select
Enable DMZ
and type the DMZ client IP in the
DMZ IP Address
.
Or you also can choose the DMZ host using the pulldown menu.
Click on
Apply Settings
to apply these settings.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top