to configure the MANUAL ADSL interface on this page:
INTERNET SETUP
If you want to type connection configuration for various types, please
enable
Manual Setup
.
MANUAL ADSL CONNECTION SETUP
PPPoE/PPPoA
Choose this option if your ISP uses PPPoE/PPPoA.(For most DSL users)
Dynamic IP Address
Choose this option if your ISP uses Dynamic IP Address over DSL.
Static IP Address
Choose this option if your ISP uses Static IP assignments.
Bridge
Choose this option if your ISP uses Bridge.
Page 27 / 73
27
D-Link DSL-2740R
Section 3 - Configuration
For PPPoE/PPPoA connection
Type the
Username
and
Password
(and PPPoE Service Name, if required by
your ISP).
Type the service name from your ISP in
Servername.
Choose
PPPoE LLC/Snap-Bridging, PPPoE VC-mux, PPPoA LLC/
encapsulation
or
PPPoA VC-mux
in
Connection Type
.
Type the MTU value which you want (it should be less than 1492) in
MTU
.
Set the time for which if your data doesn’t pass through the connection, it
will be disconnected in
Idle Time Out
. The default time is 0 and it means it
is always on.
DNS AND DEFAULT GATEWAY
Select
Obtain DNS server address automatically
to get DNS from your ISP.
Or
Select
Use the following DNS server addresses
to type the DNS IPs in the
Preferred DNS server
and
Alternate DNS server
.
Page 28 / 73
28
D-Link DSL-2740R
Section 3 - Configuration
Type the PVC values which are from your ISP in
VPI/VCI.
Select
Enable NAT
when you want to have WAN and LAN.
Select
Enable Firewall
when you want to have the basic filter function, for
example, ICMP ping to DSL-2740R.
Select
Enable IGMP Proxy
when you want to let IAD act as a IGMP proxy
which can help the proxy server to send IGMP query packets to the IPTV
clients.
Click on
Apply
to save the configuration.
Page 29 / 73
29
D-Link DSL-2740R
Section 3 - Configuration
Wireless
Use this section to configure the wireless settings for your D-Link router. Please note that changes made in this section will also need to be duplicated
onto your wireless clients and PC.
To access the
WIRELESS
(WLAN) settings window, click on
Wireless Setup
in the SETUP directory.
Wireless Network Setting
Click on
Wireless Connection Setup Wizard
to set up the wireless connection
in an easy way. It will use a Web-based Wizard to assist you in connecting to your
new D-Link Systems Wireless Router.
Note: Before launching the wizard, please make sure you have followed all the
steps outlined in the Quick Installation Guide included in the package.
Click on the
Add Wireless Device with WPS
button. This wizard is designed to
assist you in connecting your wireless device to your router with WPS. It will guide
you using step-by-step instructions on how to get your wireless device connected.
If you would like to configure the Internet settings of your new D-Link Router
manually, then click on
Manual Wireless Connection Setup
.
Page 30 / 73
30
D-Link DSL-2740R
Section 3 - Configuration
Clicking on
Wireless Connection Setup Wizard
will open the D-Link Wireless
Security Setup Wizard.
Enable Your Wireless Network
Your wireless network is enabled by default. You can simply uncheck the
Enable
Your Wireless Network
checkbox to disable wireless.
Network Name (SSID)
identifies members of the Service Set. Accept the default
name or change it to something else. If the default SSID is changed, all other
devices on the wireless network must also use the same SSID.
In order to protect your network from hackers and unauthorized users,
Auto
(WPA or WPA2) security will be used. We provide users a random pre-shared
key automatically. You can also set it manually if you do not prefer the key we
generate.
Type a string (8-63 characters, such as a~z, A~Z, or 0~9) for
Pre-Shared Key
.
Click
Prev
to go back to the previous page.
Click
Next
to go to the next page.
Click
Cancel
to return to the main menu of the Wireless Setup page.
19216811.live