Page 31 / 73 Scroll up to view Page 26 - 30
31
D-Link DSL-2740R
Section 3 - Configuration
On this page, you can check the
Wireless Status, Network Name (SSID),
Wireless Security Mode,
and
Pre-shared Key
.
Click
Prev
to go back to the previous page.
Click
Save
to save the configuration and return to the main menu of the
Wireless Setup page.
Click
Cancel
to return to the main menu of the Wireless Setup page.
Add Wireless Device with WPS
Clicking on
Add Wireless Device with WPS
will open the D-Link Add Wireless
Device with WPS (Wi-Fi Protected Setup) Wizard.
The wizard provides you the option to set up WPS using either the
Auto
or
Manual methods
.
Auto -- Select this option if your wireless device supports WPS
(Wi-Fi Protected Setup).
Manual -- Select this option to display the current wireless settings for you to
configure the wireless device manually.
Click
Next
to go to the next page.
Click
Cancel
to return to the main menu of the Wireless Setup page.
Page 32 / 73
32
D-Link DSL-2740R
Section 3 - Configuration
Add Wireless Device with WPS (Automatically)
This page allows you to select the PIN or PBC method for WPS connection.
PIN
- Enter the PIN code from your wireless device and click
Connect
to start
the handshaking.
PBC
- Click
Connect
on your wireless device and press the
Connect
button on
your wireless device within 120 seconds to start the handshaking.
Click
Prev
to go back to the previous page.
Add Wireless Device with WPS (WI-FI PROTECTED SETUP) WIZARD
This page will count down the timer for you to start WPS on the wireless device
you are adding.
Add Wireless Device with WPS (Manually)
This screen shows the information for the SSID and the Network key that allow
you to modify the current setting. If you selected Auto in the previous step, you
won’t see this page. Please then refer to the next column.
Please type the network name in the
Network Name SSID
field.
Please type the network key in the
Network Key
field.
Click
Next
to proceed to the next page.
Page 33 / 73
33
D-Link DSL-2740R
Section 3 - Configuration
Add Wireless Device with WPS (WI-FI PROTECTED SETUP) Wizard
It will show the wireless login information. You can check if it is
correct, then click
Next
.
Manual WIRELESS Connection Setup SETTINGS
Clicking on
Manual Wireless Connection Setup
on the Wireless Setup
page will take you to the
Manual Wireless Connection Setup
page.
Click on
Enable Wireless
to allow the router to
operate in the wireless environment.
The
SSID
identifies members of the Service Set. Accept the default name
or change it to something else. If the default SSID is changed, all other
devices on the wireless network must also use the same SSID.
The
Wireless Channel
can let you select the channel of your access point.
Channel availability is different for different countries due to their regulations.
Select
802.11 Mode
to operate in b/g/n mode.
Or select specified mode to use 802.11b only, 802.11g only, or 802.11n only.
Choosing
Mixed 802.11g and 802.11b
enables the DSL-2740R to detect clients and
use 802.11g or 802.11b to synchronize.
Choosing
Mixed 802.11n, 802.11g and 802.11b
enables the DSL-2740R to detect
clients and use 802.11n, 802.11g or 802.11b to synchronize.
Page 34 / 73
34
D-Link DSL-2740R
Section 3 - Configuration
Channel Width
The maximum rate for 20 MHz/GI=0 is 130 Mbps.
The maximum rate for 40 MHz/GI=1 is 300Mbps.
Transmission Rate
It is suggested that you keep the Best (automatic) selection.
This is related to Receive Sensitivity as follows, for example:
Choose Visible or Invisible to decide if you want to broadcast its SSID.
MANRATE
HT20/GI=0
HT40/GI=0
HT40/GI=1
MCS 0
0x80
6.5 Mbps
13.5 Mbps
X
MCS 1
0x81
13 Mbps
27 Mbps
X
MCS 2
0x82
19.5 Mbps
40.5 Mbps
X
MCS 3
0x83
26 Mbps
54 Mbps
X
MCS 4
0x84
39 Mbps
81 Mbps
X
MCS 5
0x85
52 Mbps
108 Mbps
X
MCS 6
0x86
58.5 Mbps
121.5 Mbps
X
MCS 7
0x87
65 Mbps
135 Mbps
150 Mbps
MCS 8
0x88
13 Mbps
27 Mbps
X
MCS 9
0x89
26 Mbps
54 Mbps
X
MCS 10
0x8a
39 Mbps
81 Mbps
X
MCS 11
0x8b
52 Mbps
108 Mbps
X
MCS 12
0x8c
78 Mbps
162 Mbps
X
MCS 13
0x8d
104 Mbps
216 Mbps
X
MCS 14
0x8e
117 Mbps
243 Mbps
X
MCS 15
0x8f
130 Mbps
270 Mbps
300 Mbps
Page 35 / 73
35
D-Link DSL-2740R
Section 3 - Configuration
WIRELESS SECURITY Mode
To protect your privacy you can configure wireless security features. This
device supports three wireless security modes including WEP, WPA, and
WPA-Personal. WEP is the original wireless encryption standard. WPA
provides a higher level of security. WPA-Personal does not require an
authentication server.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top