Page 31 / 97
Scroll up to view Page 26 - 30
31
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 6 - Setup
Network Address Translation Settings (MER/DHCP)
Enable NAT:
Enable Fullcone
NAT:
Enable Firewall:
Enable IGMP
Multicast:
Enable VLAN
Select if you would like to share your internet
connection with multiple computers.
The router
will share your DSL connection with wired and
wirelessly connected computers.
Select this option if you would like to utilize a one-
to-one Network Address Translation.
It will map
a single internal IP address to a single external IP
address.
Select if you would like to utilize the firewall to
help protect you from unwanted internet threats.
Use default setting unless otherwise instructed
by your ISP.
Use the default setting unless otherwise instructed
by your ISP.
Click
Next
.
Page 32 / 97
32
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 6 - Setup
DNS Server Configuration (MER/DHCP)
If Obtain DNS Server address automatically is selected, this router accepts the
first received DNS assignment from the MER/DHCP enabled PVC during the
connection establishment.
If Use the following DNS server addresses is selected, enter the primary and
secondary (optional) DNS server IP addresses.
Page 33 / 97
33
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 6 - Setup
Default Gateway (MER/DHCP)
In this section, you can select a preferred WAN interface as the system default gateway.
Page 34 / 97
34
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 6 - Setup
Setup Summary (MER/DHCP)
Confirm the settings on this page match the settings provided by your ISP.
To make any changes, click
Back
.
If your settings are correct, click
Apply.
Note:
After clicking Apply, you will have to reboot the router in order to activate your connection.
Page 35 / 97
35
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 6 - Setup
Bridging
This option is Enabled by default.
Deselecting
this option will cause your DSL connection
to be disabled.
Enter any name that will help you identify
your connection.
This field will not affect
your connection.
Click
Next
.
Enable WAN
Service:
Service Name:
19216811.live