16

D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router

Section 6 - Setup

Setup

T

his section will show you how to configure your new D-Link wireless router using the web-based configuration utility. Please prepare your DSL

account information provided by your Internet Service Provider (ISP).

Setup Wizard

To quickly configure your router, click

Setup Wizard

.

17

D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router

Section 6 - Setup

Click

Next

to continue.

Create a new password and click

Next

to continue or click

Skip

to keep

your current password.

18

D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router

Section 6 - Setup

In this section you may configure, update, and maintain the correct time

for the internal system clock.

Set the time zone that you are in and set

the NTP (Network Time Protocol) Server.

Select the time zone from the

drop-down menu and then click

Next

to continue.

19

D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router

Section 6 - Setup

Select your Country and Internet Service provider from the drop-down

menus. If your Country or ISP is not on the list, please select “

others

”.

Refer to your DSL account information and select the proper Protocol and

Connection Type. Next, enter your ISP assigned VPI and VCI settings.

Alternatively, you may check the box labeled Enable DSL Auto-Scan. Click

Next

to continue.

To log out of the router’s user interface at any time during the setup, click

on the

Logout

button. A confirmation screen will appear confirming that

you really want to log out.

20

D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router

Section 6 - Setup

Configure Wireless Network

If you would like to make wireless available, this box must be

checked. To Disable wireless, uncheck this box.

Choose Invisible if you would like to hide any access point for

your router so a station cannot obtain the SSID through passive

scanning.

Give your wireless network a name. For security reasons it is

recommended to change the pre-configured network name.

It is suggested to use WPA2-PSK for the highest level of wireless

security.

Enable Your

Wireless Network:

Visibility Status:

Wireless Network

Name (SSID):

Security Level: