Page 11 / 97
Scroll up to view Page 6 - 10
11
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 3 - Installation Diagram
Installation Diagram
1
2
LAN
3
4
ON/OFF
RESET
WIRELESS
ON/OFF
12V
-
1A
DSL
DSL-2740B Router
Desktop Computer
Page 12 / 97
12
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 4 - Configuring Your Computer
Prior to accessing the router through the LAN port, note the following necessary configurations:
• Your PC’s TCP/IP address: 192.168.1.x (where“x”is any number between 2 and 254)
• Subnet mask: 255.255.255.0
Below are the procedures for configuring your computer.
Follow the instructions for the operating system that you are using.
Configuring Your Computer
Windows
®
7, Vista
®
,
Windows XP, 2000
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows® 7 - Click on
Start > Control Panel > Network and Internet > Network and Sharing Center.
Windows Vista® - Click on
Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.
Windows XP - Click on
Start > Control Panel > Network Connections.
Windows 2000 - From the desktop, right-click
My Network Places > Properties.
Step 2
Right-click on the
Local Area Connection
which represents your D-Link network adapter and select
Properties.
Step 3
Highlight
Internet Protocol (TCP/IP)
and click
Properties.
Page 13 / 97
13
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 4 - Configuring Your Computer
Step 4
In the Internet Protocol (TCP/IP) Properties dialog box, click on the radio buttons labeled
Obtain an IP address automatically
and
Obtain DNS
server address automatically.
Step 5
Click
OK
twice to save your settings.
Page 14 / 97
14
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 4 - Configuring Your Computer
Mac
These are instructions for configuring your Mac OS X operating system
1.
In the Mac OS X Dock, click on the
System Preferences
icon.
2.
Under
Internet & Network
, click
Network
.
In the
Show
menu, select
Built-in Ethernet
or Ethernet (Depending on your Mac OS version.)
3.
Click the
TCP/IP
tab.
4.
In the Configure menu, select
Using DHCP
.
5.
Click
Apply
Now and Save if your computer prompts you to save changes.
Page 15 / 97
15
D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router
Section 5 - Log In To The Router
Log In To The Router
This section will explain how to log in to your router using the following steps:
1. Launch your web browser.
Enter
.
A login screen like the one below will be displayed after you connect to the user interface.
3. Enter your user name and password, and then click
OK
to display the user interface.
Note:
Use
admin/admin
as default for username and
password.
• The admin account can perform all functions
(username / password:
admin / admin
).
Note:
Passwords can be changed at any time.
Note:
This manual has been prepared using the admin user name.
19216811.live