46

D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router

Section 7 - Advanced Setup

MAC Filter

The web page allows you to create a list of MAC addresses that are banned or allowed association with the wireless access point.

MAC Restrict

Mode:

Add a MAC

Access Control:

Remove a MAC

Access Control:

Click

Save/Apply

to add the MAC address to the list.

The function can be turned on/off, select

Disabled

to disable this

function. Vice versa, to enable the function. After enabling the

function, you can filter wireless users according to their MAC address,

either allowing or denying access. Select

Allow

to make any wireless

MAC address in the Wireless Access Control List can be linked to. And

select

Deny

to ban any wireless MAC address in the Wireless Access

Control List.

To add a new MAC address to your wireless MAC address filters, click

Add

to show the next page. Type the MAC Address in the entry field

provided.

SelectthecheckboxintherightcolumnofthelistfortheMACaddress

to be removed and click

Remove

.

47

D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router

Section 7 - Advanced Setup

Wireless Bridge

TheWireless Distribution System (WDS) allows you to extend the range of your wireless network by introducing one or moreWDS-enabled devices

into your wireless network. You can only establish WDS links with WDS-enabled devices.

AP Mode:

Bridge Restrict:

Select Access Point’s functionality to be Access Point or pure Wireless

Bridge. You can select Wireless Bridge (also known as Wireless

Distribution System) to disables access point functionality. Selecting

Access Point enables access point functionality and Wireless bridge

functionality will still be available and wireless stations will be able to

associate to the AP.

Select Disabled to turn off wireless bridge restrictions. Any wireless

bridge will be granted access. Selecting Enabled or Enabled (Scan)

enables wireless bridge restriction. If enabled, only the specified

bridges are granted access.

Click

Save/Apply

to configure the wireless bridge options and put the modifications

into effect.

48

D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router

Section 7 - Advanced Setup

Wireless QoS

This page allows you to control the wireless traffic QoS rule which consists of a class name and at least one condition.

49

D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router

Section 7 - Advanced Setup

Port Forwarding

Port forwarding allows you to direct incoming traffic from the WAN side to the internal server with a private IP address on the LAN side.

50

D-Link DSL-2740B ADSL2+ Modem with Wireless N 300 Router

Section 7 - Advanced Setup

Select the

Service Name

and enter the IP server Address, then click

Apply.