31

Wireless Interface

Select one of the two connection modes:

Infrastructure

(default) or

Ad-Hoc

. Assign

the SSID in the

SSID

box. You can manually type the name or select one from the

drop-down list. To search the available wireless access point within the network,

click the

Site Survey

button. Select a channel from the

Wireless Channel

list, and

a data transmit rate from the

Transmission Rate

list.

Encryption

In this section, you can select

Disable

,

WEP Encryption

or

WPA-PSK /

WPA2-PSK

.

Click the

Disable

radio button to disable the encryption function of wireless network.

Click the

WEP Encryption

radio button to select Length and Format of WEP

encryption. Click either

64bits

or

128bits

in

Length

, select the WEP key format as

ASCII

(ASCII characters) or

HEX

(hexadecimal) in

Format

, and enter the key(s) for

the network in the Key box (1-4). 64bits WEP encryption uses a 10 hexadecimal

character key. The WEP encryption key must match the WEP settings on your AP or

wireless router to connect properly.

Click

WPA-PSK / WPA2-PSK

to use a WPA-PSK / WPA2-PSK passphrase. Enter a

WPA-PSK / WPA2-PSK passphrase or key used on your network.

SETUP

>

Printer Setup

The

Printer Setup

screen allows you install the printer drivers for the printer

currently connected to your print server.

32

Network Printer Wizard

Clicking

Next

to download and run a windows wizard program which will install a

network printer onto your computer. When you click

Next

you will be asked to

download and run some software.

33

The above screen is the Network Printer Wizard so please click

RUN

, and if a

second window appears as below click

RUN

again.

34

Please select the printer required, then click

NEXT

to continue.

The wizard provides three ways for you to select printer driver:

1. Show current installed drivers:

You may select this option, “

Show currently installed drivers

”, to check if the

same printer driver already existed for use. If not, you may try the next method. After

done the selection of printer driver, click

Next>

button to continue.

35

2. Select from manufacturer list:

Check this option, “Select from manufacturer list”, to manually select your printer

from drop-down menus by brand and model. Click

Next>

button to continue when

you find a desired driver. If not, try the last way (

Have Disk

). After done the selection

of printer driver, click

Next>

button to continue.