Page 41 / 154
Scroll up to view Page 36 - 40
36
3. Have Disk:
Click
Have Disk
button to bring up the following window. Insert the manufacture’s
installation CD-ROM to install the printer driver. After the correct driver is selected,
click
OK
button to continue.
Page 42 / 154
37
After done the selection of printer driver, the wizard will ask you to confirm your
selection again in the following window. Beside, you are allowed to edit the name of
the printer in the field “
Network Printer Name
” and enable this printer as the default
printer by checking the box “
Use this printer as the default printer for
Windows-based programs
”.
After you done the verification and configuration in the following window, click
Next>
button to continue. Then the printer (e.g. HP Laser 2000 used in this manual) will be
auto-created in Windows’
Printers and Faxes
window as the following illustration.
Page 43 / 154
38
When the following window shows up, you may do print test by clicking
Print Test
Page
button to check if you can do printing normally. If yes, click
OK
button to close
the
D-Link Add Printer Wizard
dialogue screen.
Page 44 / 154
39
If yes, then click
Finish
button to exit the installation window and now you may start
your printing tasks.
Page 45 / 154
40
ADVANCED > Advanced LAN
The
Advanced LAN
screen allows you to further network setting of print server,
while you are recommended better not to change the settings unless instructed to
modify the setting by your network administrator. The
Advanced LAN
screen
contains these fields:
TCP/IP
,
Microsoft Network,
and
AppleTalk
.
19216811.live