46

Enable E-mail Notification

You can set the print server to send an alert message when the printer status

changes through E-mail. To enable this function, set the

Enable e-mail notification

option to Yes. Then, input the administrator's E-mail address in the

Destination

e-mail Address

field.

E-mail Account Details

You can assign an E-mail address to the print server, so that your mail of the

account can be printed out directly through the printer (ASCII text only). To enable

this function, enter the E-mail account in the

Print Server E-mail Address

field.

Then enter the server address, used to receive your E-mail here, in the

Incoming

E-mail (POP3) Server Address

field. For

Outgoing E-mail (SMTP) Server

Address

field, enter the server address that is used to send your E-mail here.

If your mail server needs to verify the user when sending E-mail, Print Server will

apply the

E-mail Account (POP3) Name

and

E-mail Account (POP3) Password

to the mail server.

E-mail Printing

This section is for you to do E-mail Printing configuration, including:

E-mail Printing (ASCII Text Only)

: Allows you to enable or disable the E-mail

printing.

Check E-mail Interval

: Allow you to set up a time interval in minute in order to

check/receive E-mail periodically.

After done the configuration, click Apply Settings to restore the new configuration, or

Cancel to abandon.

47

ADVANCED > SNMP

The

SNMP

screen allows you to use SNMP (Simple Network Management Protocol)

to manage complex networks.

SNMP Management

Community 1/2/3

: Enter a name in the

Name

frame, and configure the

Access

Right

by selecting

Read Only

or

Read/ Write

from the pull-down menu.

48

MAINTENANCE > Password

The

Password

screen allows you to change the password of the print server by

entering the current password in

Current Password

field and new password in

New

Password

and

Confirm Password

fields. After done the configuration, click Apply

Settings to enable and restore the new password, or Cancel to abandon. Be aware

that the default password of the print server is blank.

49

MAINTENANCE > Save/Restore Settings

The

Save/Restore Settings

screen not only allows you to save the current

configuration in a computer for backup by clicking Save, but also allows you to

reload a configuration that you saved before by clicking Browse to direct to the

backup file, and then clicking Update Settings for reloading. Beside, you are also

allowed to return the print server to the default settings by clicking Restore Device.

50

MAINTENANCE > Firmware Upgrade

The

Firmware Upgrade

screen displays you the current firmware’s information of

the print server, and also allows you to upgrade the firmware of the print server

when a new version of firmware is available.

Click Browse to point to the firmware file, and then click Upgrade.