Page 26 / 154
Scroll up to view Page 21 - 25
21
LAN
: You may also to specify dynamic or static IP address for your print server.
Then click
Apply
button to implement the new setting.
Port Information
: This is the main function of the
PS-Wizard
for you to easily
add a printer on your computer.
To add a printer, click
, then the following window will display.
Page 27 / 154
22
The wizard provides three ways for you to select printer driver:
1. Show current installed drivers:
You may select this option, “
Show currently installed drivers
”, to check if the
same printer driver already existed for use. If not, you may try the next method. After
done the selection of printer driver, click
Next>
button to continue.
2. Select from manufacturer list:
Check this option, “Select from manufacturer list”, to manually select your printer
from drop-down menus by brand and model. Click
Next>
button to continue when
you find a desired driver. If not, try the last way (
Have Disk
). After done the selection
of printer driver, click
Next>
button to continue.
3. Have Disk:
Click
Have Disk
button to bring up the following window. Insert the manufacture’s
installation CD-ROM to install the printer driver. After the correct driver is selected,
click
OK
button to continue.
After done the selection of printer driver, the wizard will ask you to confirm your
Page 28 / 154
23
selection again in the following window. Beside, you are allowed to edit the name of
the printer in the field “
Network Printer Name
” and enable this printer as the default
printer by checking the box “
Use this printer as the default printer for
Windows-based programs
”.
After you done the verification and configuration in the following window, click
Next>
button to continue. Then the printer (e.g. HP Laser 2000 used in this manual) will be
auto-created in Windows’
Printers and Faxes
window as the following illustration.
When the following window shows up, you may do print test by clicking
Print Test
Page 29 / 154
24
Page
button to check if you can do printing normally. If yes, then click
Finish
button
to exit the installation window and now you may start your printing tasks.
Page 30 / 154
25
Using the Web Configuration
Home
To begin managing the DP-G310, simply launch the browser (e.g. Internet Explorer
6.0 used in this manual) you have installed on your computer and direct it to the URL
address: dlink-xxxxxx, where xxxxxx are the last six digits of DP-G310’s MAC
address. The MAC address can be found on the bottom side of the DP-G310
device.
When you enter the correct URL, a password input dialog will pop up the following
screen. Type “
admin
” in the
User name
field, leave the
Password
field as blank,
and then click
OK
button.
19216811.live