9
when used with other D-Link devices.
Wireless Installation Considerations
Installing Consideratons
The D-Link DP-G310 lets you print through your network, using a wireless
connection, from virtually anywhere within its operating range. Keep in mind,
however, that the number, thickness and location of walls, ceilings, or other objects
that the wireless signals must pass through, may limit the range. Typical ranges vary
depending on the types of materials and background RF (radio frequency) noise in
your home or business. The key to maxinmizing wireless range is to follow these
basic guidelines:
1.
Keep the antenna of the DP-G310 in an upright position.
2.
Keep the number of walls and ceilings between the DP-G310 and other
network devices to a minimum. Each wall or ceiling can reduce your D-Link
wireless products range from 3-90 feet (1-30 meters). Position your devices
so that the number of walls or ceilings is minimized.
3.
Be aware of the direct line between network devices. A wall that is 1.5 feet
thick (0.5 meters), at a 45-degree angle appears to be almost 3 feet (1meter)
thick. At a 2-degree angle it looks over 42 feet (14 meters). Polistion devices
so that the signal will travel straight through a wall or ceiling (instead of at an
angle) for better reception.
4.
Building materials can impede the wireless signal. A solid metal door or
aluminum studs amy have a negative effect on range. Try to position
wireless devices and computers with wireless adapters so that the signal
passes through drywall or open doorways and not other materials.
5.
Keep your product away (at least 3-6 feet or 1-2 meters) from electrical
overhead lower actual data throughput rate.
19216811.live