D-Link DI-824VUP Router Manual PDF (Setup & Configuration Guide)

Page 126 / 155 Scroll up to view Page 121 - 125

126

Frequently Asked Questions (continued)

Step 17

Select 3DES as the

Encryption Algorithm and MD5 as the

Authentication Algorithm. Click Apply.

Step 18

Enter a Lifetime value of 3600

and then select Sec. as the unit for the

lifetime value.

How can I set up my DI-824VUP+ to work with a DI-804V or DI-804HV

Router? (continued)

Step 19

Select 1 out of the Proposal

ID dropdown menu and click Add To,

which will add the proposal that was

just configured to the IPSec Proposal

Index. Click Apply. The device will

restart. Click on the Continue button.

Page 127 / 155

127

Frequently Asked Questions (continued)

Next you need to configure the DI-804V or DI-804HV Router.

Step 1

Access the router’s web configuration by entering the router’s IP address in

your web browser. The default IP address is 192.168.0.1. Login using your password.

The default username is “admin” and the password is blank.

Step 2

Click on Basic Setup and then select Device IP Settings on the left.

Step 3

Change the LAN IP address so

that it is on a different subnet than the

LAN of the DI-824VUP+.

Step 4

Click Next until you reach the

Save & Restart screen. Click Save &

restart and then click Basic Setup once

until the unit has rebooted.

Step 5

Click on VPN Settings.

How can I set up my DI-824VUP+ to work with a DI-804V or DI-804HV

Router? (continued)

Step 6

Name your VPN connection and

click ADD.

Step 7

In Remote IP Network and

Remote IP Netmask fields enter the

network identifier and corresponding

subnet mask of the DI-824VUP+´s LAN.

Step 8

In the Remote Gateway IP field

enter the WAN IP address of the DI-

824VUP+ and make sure that the

Network Interface is set to WAN

Ethernet.

Step 9

Verify that Secure Association is set to IKE and that Perfect Forward Secure is

Disabled.

Page 128 / 155

128

Frequently Asked Questions (continued)

Step 10

Verify the Encryption Protocol

is set to 3DES and enter in your

Preshared Key.

Note: The Preshared Key needs to be

identical to the one configured on the

DI-824VUP+.

Step 11

Leave the Key Life and IKE Life

Time values at their default levels and click

SAVE.

Step 12

Click Next and then click on

Save & Restart.

How can I set up my DI-824VUP+ to work with a DI-804V or DI-804HV

Router? (continued)

After you have configured both routers, you need to establish a connection.

Step 1

Open a command prompt and

from a computer on the internal LAN of

the DI-824VUP+ and ping the IP address

of a computer that is on the internal LAN

of the DI-804V or DI-804HV, or vice versa.

Step 2

Once you begin to receive

replies, the VPN connection has been

established.

Page 129 / 155

129

Frequently Asked Questions (continued)

Step 5

When the VPN has been

established the Status will be Active.

Step 3

To view the Status of the VPN

on the DI-804V or DI-804HV, click on

Device Status.

Step 4

From the Device Status screen

click on VPN Status.

How can I set up my DI-824VUP+ to work with a DFL-300 Firewall?

You need to first configure your DI-824VUP+ router.

Step 1

Log into the web based configuration of the router by typing in the IP address of

the router (default: 192.168.0.1) in your web browser. By default the username is “admin”

and there is no password.

Step 2

Click the VPN button on the left column, select the checkbox to Enable the

VPN, and then in the box next to Max. number of tunnels, enter the maximum numbers

of VPN tunnels that you would like to have connected.

How can I set up my DI-824VUP+ to work with a DI-804V or DI-804HV

router? (continued)

Page 130 / 155

130

How can I set up my DI-824VUP+ to work with a DFL-300 Firewall?

(continued)

Frequently Asked Questions (continued)

Step 3

In the space provided, enter the

Tunnel Name for ID number 1, select IKE,

and then click More.

Step 4

In the

Local Subnet

and

Local

Netmask

fields enter the network

identifier for DI-824VUP+´s LAN and the

corresponding subnet mask.

Step 5

In the

Remote Subnet

and

Remote Netmask

fields enter the

network identifier for the DFL-300´s

Internal interface and the corresponding

subnet mask.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share