Page 141 / 155
Scroll up to view Page 136 - 140
141
How do I use
PC Anywhere
with my DI-824VUP+? (continued)
Frequently Asked Questions (continued)
Step 6
Create a second entry as
shown here:
Step 7
Click
Apply
and then
click
Continue
.
Step 8
Create a third and final
entry as shown here:
Step 9
Click
Apply
and then
click
Continue
.
Step 10
Run
PCAnywhere
from the remote site and use the WAN IP Address of the
router, not your computer´s IP Address.
Page 142 / 155
142
How can I use
eDonkey
behind my DI-824VUP+?
Frequently Asked Questions (continued)
You must open ports on your router to allow incoming traffic while using
eDonkey.
eDonkey uses three ports (4 if using CLI):
4661 (TCP) To connect with a server
4662 (TCP) To connect with other clients
4665 (UDP) To communicate with servers other than the one you are connected to.
4663 (TCP) *Used with the command line (CLI) client when it is configured to allow
remote connections. This is the case when using a Graphical Interface (such as the
Java Interface) with the client.
Step 1
Open your web
browser and enter the IP
Address of your router
(192.168.0.1). Enter
username (admin) and
your password (leave
blank).
Step 2
Click on
Advanced
and then click
Firewall
.
Step 3
Create a new
firewall rule:
Click
Enabled
.
Enter a name (edonkey).
Click
Allow
.
Next to Source, select
WAN
under interface. In
the first box, enter an
*
.
Leave the second box
empty.
Next to Destination, select
LAN
under interface. Enter the IP Address of the computer
you are running eDonkey from. Leave the second box empty. Under Protocol, select
*
.
In the port range boxes, enter
4661
in the first box and then
4665
in the second box.
Click
Always
or set a schedule.
Step 4
Click
Apply
and then
Continue
.
Page 143 / 155
143
Frequently Asked Questions (continued)
To allow you to play SOCOM and hear audio, you must download the latest firmware
for the router (if needed), enable Game Mode, and open port 6869 to the IP Address of
your Playstation.
Step 1
Upgrade firmware (follow link above).
Step 2
Open your web browser and enter the IP Address of the router (192.168.0.1).
Enter username (admin) and your password (blank by default).
Step 3
Click on the
Advanced
tab and then click on
Virtual Server
on the left side.
Step 4
You will now create a new Virtual Server entry. Click
Enabled
and enter a
name (socom). Enter the IP Address of your Playstation for
Private IP
.
Step 5
For
Protocol Type
select Both. Enter
6869
for both the
Private Port
and
Public Port
. Click
Always
. Click
Apply
to save changes and then
Continue
Step 6
Click on the
Tools
tab and then
Misc
on the left side.
Step 7
Make sure
Gaming Mode
is Enabled. If not, click
Enabled
. Click
Apply
and
then
Continue
.
How do I set up my DI-824VUP+ for SOCOM on my Playstation 2?
Page 144 / 155
144
NAME - Gamespy1
PRIVATE IP - The IP Address of
your computer that you are
running Gamespy from.
PROTOCOL TYPE - Both
PRIVATE PORT - 3783
NAME - Gamespy2
PRIVATE IP - The IP Address
of your computer that you are
running Gamespy from.
PROTOCOL TYPE - Both
PRIVATE PORT - 6500
PUBLIC PORT - 6500
SCHEDULE - Always.
Frequently Asked Questions (continued)
Step 1
Open your web browser and enter the IP Address of the router (192.168.0.1).
Enter admin for the username and your password (blank by default).
Step 2
Click on the Advanced tab and then click Virtual Server on the left side.
Step 3
You will create 2 entries.
Step 4
Click Enabled and enter
Settings:
Click
Apply
and then
continue
Step 5
Enter 2nd entry:
Click Enabled
Click
Apply
and then
continue
.
How can I use Gamespy behind my DI-824VUP+?
Page 145 / 155
145
Make sure that you did not enable proxy/firewall in the KaZaA software.
Frequently Asked Questions (continued)
How do I configure my DI-824VUP+ for KaZaA and Grokster?
The following is for KaZaA, Grokster, and others using the FastTrack P2P file sharing
system.
In most cases, you do not have to configure anything on the router or on the Kazaa
software. If you are having problems, please follow steps below:
Step 1
Enter the IP Address of your router in a web browser (192.168.0.1).
Step 2
Enter your username (admin) and your password (blank by default).
Step 3
Click on Advanced and then click Virtual Server.
Step 4
Click Enabled and then enter a Name (kazaa for example).
Step 5
Enter the IP Address of the computer you are running KaZaA from in the
Private IP box. Select TCP for the Protocol Type.
Step 6
Enter 1214 in the Private and Public Port boxes. Click Always under
schedule or set a time range. Click Apply.
19216811.live