D-Link DI-824VUP Router Manual PDF (Setup & Configuration Guide)

Page 121 / 155 Scroll up to view Page 116 - 120

121

Step 20

Select SHA-1, MD5, or None

as the Authentication Algorithm.

I have two DI-824VUP+ Routers, how can I set them up to work with

each other? (continued)

Frequently Asked Questions (continued)

Step 21

Enter a Lifetime value and then

either select Sec. or KB as the unit for

the lifetime value.

Step 22

Select 1 out of the Proposal ID

dropdown menu and click Add To, which

will add the proposal that was just

configured to the IPSec Proposal Index.

Click Apply and the device will restart.

Page 122 / 155

122

Step 23

Follow these instructions to configure your other DI-824VUP+ using the

exact same settings for the IKE Proposal and the IPSec Proposal.

Also make sure

that Step 4 is configured to reflect the LAN settings for what is now the Local DI-

824VUP+ and that Steps 5 & 6 are configured to reflect the Subnet and WAN IP of

what is now the remote DI-824VUP+.

Step 24

To establish the connection, open a command prompt and ping an IP

address of a computer on the remote LAN. Once you receive replies the tunnel has

been established.

I have two DI-824VUP+ Routers, how can I set them up to work with

each other? (continued)

Frequently Asked Questions (continued)

You need to first configure your DI-824VUP+ router.

How can I set up my DI-824VUP+ to work with a DI-804V or DI-804HV

Router?

Step 1

Log into the Web-based

configuration of the router by typing in

the IP address of the router (default:

192.168.0.1) in your web browser. By

default the username is “admin” and

there is no password.

Step 2

Click the VPN button on the left

column, select the checkbox to Enable

the VPN, and then in the box next to

Max. number of tunnels, enter the

maximum numbers of VPN tunnels that

you would like to have connected.

+

Page 123 / 155

123

Step 3

In the space provided, enter the

Tunnel Name for ID number 1, select IKE,

and then click More.

Frequently Asked Questions (continued)

Step 4

In the

Local Subnet

and

Local

Netmask

fields enter the network

identifier for DI-824VUP+’s LAN and the

corresponding subnet mask.

Step 5

In the

Remote Subnet

and

Remote Netmask

fields enter the

network identifier for the DI-804V or DI-

804HV’s LAN and the corresponding

subnet mask. Click Apply.

How can I set up my DI-824VUP+ to work with a DI-804V or DI-804HV

Router? (continued)

Page 124 / 155

124

Step 7

In the

Remote Gateway

field

enter the WAN IP address of the remote

DI-804V or DI-804HV and in the

Preshare

Key

field, enter a key which must be

exactly the same as the Preshare Key

that is configured on the DI-804V or DI-

804HV.

Frequently Asked Questions (continued)

Step 10

Select 3DES as the

Encryption Algorithm and SHA-1 as the

Authentication Algorithm.

Step 8

Click Apply and then click on

Select IKE Proposal.

Step 9

Enter a name for proposal ID

number 1 and select Group 2 from the

DH Group drop down menu.

Step 11

Enter a Lifetime value of 28800

and then select Sec. as the unit for the

lifetime value.

How can I set up my DI-824VUP+ to work with a DI-804V or DI-804HV

Router? (continued)

Step 6

The device will restart. Click on

the Continue button.

Page 125 / 155

125

Frequently Asked Questions (continued)

How can I set up my DI-824VUP+ to work with a DI-804V or DI-804HV

Router? (continued)

Step 12

Select 1 out of the Proposal ID

dropdown menu and click Add To, which

will add the proposal that was just

configured to the IKE Proposal Index.

Click Apply.

Step 13

The device will restart. Click

on the Continue button.

Step 14

Click Back and click on

Select IPSec Proposal.

Step 15

Enter a name for proposal ID

number 1 and select None from the DH

Group drop-down menu.

Step 16

Select ESP as the

Encapsulation Protocol.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share