Page 116 / 155
Scroll up to view Page 111 - 115
116
I have two DI-824VUP+ Routers, how can I set them up to work with
each other?(continued)
Frequently Asked Questions (continued)
Step 4
In the
Local Subnet
and
Local
Netmask
fields enter the network
identifier for the local DI-824VUP+´s LAN
and the corresponding subnet mask.
Step 5
In the
Remote Subnet
and
Remote Netmask
fields enter the
network identifier for the remote DI-
824VUP+´s LAN and the corresponding
subnet mask.
Step 6
In the
Remote Gateway
field
enter the WAN IP address of the remote
DI-824VUP+ and in the
Preshare Key
field, enter a key which must be exactly
the same as the Preshare Key that is
configured on the remote DI-824VUP+.
Step 7
Click Apply.
Page 117 / 155
117
I have two DI-824VUP+ Routers, how can I set them up to work with
each other?
(continued)
Frequently Asked Questions (continued)
Step 8
The device will restart. Click on
the Continue button.
Step 9
Click on Select IKE Proposal.
Step 10
Enter a name for proposal ID
number 1 and select Group 1, 2, or 5
from the DH Group dropdown menu.
Page 118 / 155
118
I have two DI-824VUP+ Routers, how can I set them up to work with
each other? (continued)
Frequently Asked Questions (continued)
Step 11
Select DES or 3DES as the
Encryption Algorithm.
Step 12
Select SHA-1 or MD5 as the
Authentication Algorithm.
Step 13
Enter a Lifetime value
of 2800
and then either select Sec. or KByte as
the unit for the lifetime value.
Page 119 / 155
119
I have two DI-808HV Routers, how can I set them up to work with each
other? (continued)
Frequently Asked Questions (continued)
Step 15
The device will restart. Click
on the Continue button.Then click Back.
Step 14
Select 1 out of the Proposal ID
dropdown menu and click Add To, which
will add the proposal that was just
configured to the IKE Proposal Index.
Click Apply.
Step 16
Click on Select IPSec
Proposal.
Page 120 / 155
120
I have two DI-824VUP+ Routers, how can I set them up to work with
each other?(continued)
Frequently Asked Questions (continued)
Step 17
Enter a name for proposal ID
number 1 and select Group 1, 2, 5, or
None from the DH Group dropdown
menu.
Step 18
Select ESP or AH as the
Encapsulation Protocol.
Step 19
Select DES or 3DES as the
Encryption Algorithm.
19216811.live