Page 106 / 155
Scroll up to view Page 101 - 105
106
Frequently Asked Questions (continued)
Step 4
Check your IP address. Your computer must have an IP address in the same
range of the device you are attempting to configure. Most D-Link devices use the
192.168.0.X range.
How ca
n I f
ind my IP
Addre
ss in
W
indows 95, 98, or
ME?
Step 1
Click on
Start
, then click on
Run
.
Step 2
The Run Dialogue Box will appear. Type
winipcfg
in the text field and click
OK
.
Step 3
The
IP Configuration
window will appear, displaying your
Ethernet
Adapter Information
.
±
Select your adapter from the drop down menu.
±
If you do not see your adapter in the drop down menu, your adapter is
not properly installed.
Step 4
After selecting your adapter, it will display your IP Address, subnet
mask, and default gateway.
Step 5
Click
OK
to close the IP Configuration window
Why can´t I access the Web-based configuration? (continued)
Page 107 / 155
107
Frequently Asked Questions (continued)
Step 4
(continued)
Check your IP address. Your computer must have an IP Address
in the same range of the device you are attempting to configure. Most D-Link devices
use the 192.168.0.X range.
How ca
n I f
ind my IP
Addre
ss in
W
indows 2000/XP?
Step 1
Click on
Start
and select
Run
.
Step 2
Type
cmd
then click
OK
.
Step 3
From the Command Prompt, enter
ipconfig
. It will return your IP
Address, subnet mask, and default gateway
Step 4
Type
exit
to close the command prompt.
Why can´t I access the Web-based configuration? (continued)
Page 108 / 155
108
Frequently Asked Questions (continued)
Step 4
(continued)
Check your IP address. Your computer must have an IP address
in the same range of the device you are attempting to configure. Most D-Link devices
use the 192.168.0.X range.
Make sure you take note of your computer´s Default Gateway IP Address. The Default
Gateway is the IP Address of the D-Link Router. By default, it should be 192.168.0.1.
How ca
n I a
ssign a Static IP
Addre
ss in
W
indows XP?
Step 1
Click on
Start > Control Panel > Network and Internet Connections >
Network connections
.
Step 2
See
Ste
p 2
for Windows 2000 and continue from there.
How ca
n I a
ssign a Static IP
Addre
ss in
W
indows 2000?
Step 1
Right-click on
My Network
Places
and select
Properties
.
Step 2
Right-click on the
Local
Area Connection
which represents
your network card and select
Properties
.
Highlight
Internet Protocol (TCP/
IP)
and click
Properties.
Why can´t I access the Web-based configuration? (continued)
Page 109 / 155
109
Frequently Asked Questions (continued)
How ca
n I a
ssign a Static IP
Addre
ss in
W
indows 2000?
(continued)
Click
Use the following IP Address
and
enter an IP Address that is on the same
subnet as the LAN IP address on your
router.
Exa
mple: If the router´s LAN IP
address is 192.168.0.1, make your IP
address 192.168.0.X where X = 2-99.
Make sure that the number you choose is
not in use on the network.
Set the
Default Gateway
to be the same
as the LAN IP address of your router
(192.168.0.1).
Set
the Preferred DNS server
to be the
same as the LAN IP address of your
router (192.168.0.1).
The Alternate DNS server
is not needed or enter a DNS server from your ISP.
Click
OK
twice. You may be asked if you want to reboot your computer. Click
Yes
.
How ca
n I a
ssign a Static IP
Addre
ss in
W
indows 98/Me?
Step 1
From the desktop, right-click on the
Network Neigborhood
icon (Win ME - My
Network Places) and select
Properties
Highlight
TCP/IP
and click the
Properties
button. If you have more than one
adapter,
then there will be a TCP/IP “Binding” for
each adapter. Highlight
TCP/IP > (your
network adapter)
and then click
Properties
.
Why can´t I access the Web-based configuration? (continued)
Page 110 / 155
110
Frequently Asked Questions (continued)
How ca
n I a
ssign a Static IP
Addre
ss in
W
indows 98/
Me?
(continued)
Step 2
Click
Specify an IP Address
.
Step 3
Click on the
Gateway
tab.
Enter the LAN IP Address of your router
here (192.168.0.1).
Click
Add
when finished.
Step 4
Click on the
DNS Configuration
tab.
Enter in an IP Address that is on the same
subnet as the LAN IP Address on your router.
Exa
mple: If the router´s LAN IP Address is
192.168.0.1, make your IP Address
192.168.0.X where X is between 2-99. Make
sure that the number you choose is not in
use on the network.
Step 5
Click
OK
twice.
Click
Enable DNS
. Type in a
Host
(can be
any word). Under DNS server search order,
enter the LAN IP Address of your router
(192.168.0.1). Click
Add
.
When prompted to reboot your computer,
click
Yes
.
After you reboot, the computer will now have
a static, private IP Address.
Why can´t I access the Web-based configuration? (continued)
Step 5
Access the Web management. Open your Web
browser and enter the IP Address of your D-Link device in
the address bar. This should open the log-in page for the
web management. Follow instructions to log in and complete the configuration.
19216811.live