Page 121 / 145
Scroll up to view Page 116 - 120
121
How can I set up my router to work with a DFL-300 firewall?
(continued)
Frequently Asked Questions (continued)
Step 6
In the Remote Gateway field
enter the WAN IP address of the remote
DFL-300 and in the Preshared Key field,
enter a key which must be exactly the
same as the Preshared Key that is
configured on the DFL-300.
Step 7
Click Apply and then click on
Select IKE Proposal...
Step 8
Enter a name for proposal ID number 1 and select Group 2 from the DH Group
dropdown menu.
Step 9
Select 3DES as the Encryption Algorithm and SHA-1 as the Authentication
Algorithm.
Step 10
Enter a Lifetime value of 28800
and then select Sec. as the unit for the
lifetime value.
Page 122 / 145
122
Step 11
Select 1 out of the Proposal
ID dropdown menu and click Add To,
which will add the proposal that was just
configured to the IKE Proposal Index.
Click Apply and then click Back.
How can I set up my router to work with a DFL-300 firewall?
(continued)
Frequently Asked Questions (continued)
Step 12
Click on Select IPSec
Proposal...
Step 13
Enter a name for proposal ID
number 1 and select None from the DH
Group dropdown menu.
Step 14
Select ESP as the Encapsulation Protocol.
Step 15
Select 3DES as the Encryption Algorithm and MD5 as the Authentication
Algorithm.
Step 16
Enter a Lifetime value of 28800
and then select Sec. as the unit for the
lifetime value.
Page 123 / 145
123
Step 17
Select 1 out of the Proposal
ID dropdown menu and click Add To,
which will add the proposal that was just
configured to the IPSec Proposal Index.
Click Apply and then click Restart.
How can I set up my router to work with a DFL-300 firewall?
(continued)
Frequently Asked Questions (continued)
Next you need to configure the DFL-300 firewall.
Step 1
Access the configuration screen of the DFL-300 by opening a web browser
such as Internet Explorer and type the IP address of the DFL-300 in the address bar
(192.168.1.1).
Step 2
Enter the username (admin) and the password (admin). Click OK.
Step 3
Click on
Configuration and
take note of the IP
address that your
ISP has assigned
you.
Page 124 / 145
124
How can I set up my router to work with a DFL-300 firewall?
(continued)
Frequently Asked Questions (continued)
Step 4
Click on Policy and verify that
you have an Outgoing policy configured.
If not, click on New Entry, accept the
default values, and click OK.
Step 5
Click on VPN and then click
New Entry.
Step 6
Give the VPN connection a name with no spaces.
Step 7
Enter the network identifier and subnet mask of the Internal interface.
Step 8
In the To Destination section, select either Remote Gateway—Fixed IP or
Remote Gateway—Dynamic IP. Enter the WAN IP address of the DI-804HV if Remote
Gateway—Fixed IP is selected.
Step 9
Enter the network identifier corresponding subnet mask of the DI-804HV´s LAN.
Step 10
Enter a Preshared Key. The Preshared Key needs to be identical to the one
configured on the DI-804HV
Step 11
Select Data Encryption and Authentication as the Encapsulation and click
OK.
Page 125 / 145
125
After you have configured both the router and firewall, you need to establish a
connection.
How can I set up my router to work with a DFL-300 firewall?
(continued)
Frequently Asked Questions (continued)
Step 2
Once you begin to receive replies, the VPN connection has been established.
Step 1
Open a command prompt and
from a computer connected to the Inter-
nal interface of the DFL-300 and ping the
IP address of a computer that is on the
internal LAN of the DI-804HV, or vice
versa.