Page 111 / 145 Scroll up to view Page 106 - 110
111
Step 12
Click on Select IPSec
Proposal...
How can I set up my router to work with another DI-804HV router?
(continued)
Frequently Asked Questions (continued)
Step 11
Select 1 out of the Proposal
ID dropdown menu and click Add To,
which will add the proposal that was just
configured to the IKE Proposal Index.
Click Apply and then click Back.
Step 13
Enter a name for proposal ID
number 1 and select Group 1, 2, 5, or
None from the DH Group dropdown
menu.
Step 14
Select ESP or AH as the
Encapsulation Protocol.
Page 112 / 145
112
Step 15
Select DES or 3DES as the
Encryption Algorithm and either SHA-1,
MD5, or None as the Authentication
Algorithm.
How can I set up my router to work with another DI-804HV router?
(continued)
Frequently Asked Questions (continued)
Step 16
Enter a Lifetime value and then
either select Sec. or KB as the unit for
the lifetime value.
Step 17
Select 1 out of the Proposal
ID dropdown menu and click Add To,
which will add the proposal that was just
configured to the IPSec Proposal Index.
Click Apply and then click Restart.
Page 113 / 145
113
Step 18
Follow these instructions to configure your Other DI-804HV using the exact
same settings for the IKE Proposal and the IPSec Proposal.
Also make sure that
Step 4 is configured to reflect the LAN settings for what is now the Local DI-804HV
and that Steps 5 & 6 are configured to reflect the Subnet and WAN IP of what is now
the Remote DI-804HV
Step 19
To establish the connection, open a command prompt and ping an IP
address of a computer on the remote LAN. Once you receive replies the tunnel has
been established.
How can I set up my router to work with another DI-804HV router?
(continued)
Frequently Asked Questions (continued)
You need to first configure your DI-804HV router.
How can I set up my router to work with a DI-804V router?
Step 1
Log into the web based
configuration of the router by typing in
the IP address of the router (default:
192.168.0.1) in your web browser. By
default the username is “admin” and there
is no password.
Step 2
Click the VPN button on the left column, select the checkbox to Enable the
VPN, and then in the box next to Max. number of tunnels, enter the maximum numbers
of VPN tunnels that you would like to have connected.
Page 114 / 145
114
Step 3
In the space provided, enter the
Tunnel Name for ID number 1, select IKE,
and then click More.
How can I set up my router to work with a DI-804V router? (continued)
Frequently Asked Questions (continued)
Step 4
In the Local Subnet and Local
Netmask fields enter the network
identifier for DI-804HV´s LAN and the
corresponding subnet mask.
Step 5
In the Remote Subnet and
Remote Netmask fields enter the network
identifier for the DI-804V´s LAN and the
corresponding subnet mask.
Page 115 / 145
115
Step 6
In the Remote Gateway field
enter the WAN IP address of the remote
DI-804V and in the Preshared Key field,
enter a key which must be exactly the
same as the Preshared Key that is
configured on the DI-804V.
How can I set up my router to work with a DI-804V router? (continued)
Frequently Asked Questions (continued)
Step 9
Select 3DES as the Encryption Algorithm and SHA-1 as the Authentication
Algorithm.
Step 7
Click Apply and then click on Select IKE Proposal...
Step 8
Enter a name for proposal ID number 1 and select Group 2 from the DH Group
drop down menu.
Step 10
Enter a Lifetime value of 28800
and then select Sec. as the unit for the
lifetime value.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top