Page 41 / 72
Scroll up to view Page 36 - 40
³1
D-Link DCS-910/9±0 User Manual
Section ² - Configuration
Click
Next
to start the installation.
Note:
The D-ViewCam installation process may take several minutes to
complete.
Click
Next
Click
Finish
to complete the installation.
Click
Finish
Page 42 / 72
³±
D-Link DCS-910/9±0 User Manual
Section ² - Configuration
Add a Camera
To start D-ViewCam, select
Start
>
All Programs
>
D-Link
>
D-Link D-ViewCam
.
Enter
Admin
as the default user name and leave the password
blank. Click
/ OK to log into the system and access the Add
Camera Wizard.
Note:
Please refer to page 51 in the D-ViewCam user manual
to change your password.
This section will show you how to start and add a camera to the D-ViewCam system.
Page 43 / 72
³²
D-Link DCS-910/9±0 User Manual
Section ² - Configuration
Welcome to the Add Camera Wizard. Use this wizard to add your cameras to the D-ViewCam system.
Note:
Use the left or right arrow to navigate the wizard.
Click
/
Next
to continue.
Click
Next
Page 44 / 72
³³
D-Link DCS-910/9±0 User Manual
Section ² - Configuration
Choose which method to add your camera(s). You can choose
Auto
Discovery
to automatically search for your camera(s), or choose
Add
Manually
to add your camera(s) via the camera’s IP address. Click
Next
to continue.
If you choose
Auto Discovery
, the system will search all available
cameras that are located on the same LAN with same subnet. The
system will place all of the cameras under the default map called My
Map. Click
Next
to continue.
If you choose
Add Manually
, you will need to enter the IP address of the
camera(s). Click
Next
to continue.
DCS-910-55
Page 45 / 72
³´
D-Link DCS-910/9±0 User Manual
Section ² - Configuration
D-ViewCam shows the detected IP camera(s) information. You can choose and schedule the recording for each
camera.
• 24/7 Continuous Recording
: Continuously recording 24 hours a day, 7 days a week.
• 24/7 Motion Detection Recording
: Continuously monitoring but ONLY recording when motion is detected.
• Office Hours Only
: Continuously monitoring during office hours (08:00 AM to 06:00 PM) and ONLY recording
when motion is detected.
• Non-Office Hours Only
: Continuously monitoring during non-office hours (06:00 PM to 08:00 AM) and ONLY
recording when motion is detected.
Note:
Excluding 24/7 Continuous Recording, other schedule recording types can ONLY do recording when motion is
detected.
Click
Next
to continue.
DCS-910
DCS-910-55
19216811.live