Page 36 / 72
Scroll up to view Page 31 - 35
²µ
D-Link DCS-910/9±0 User Manual
Section ² - Configuration
Maintenance > Backup and Restore
In this section, you can save and restore your
configuration, restore the factory settings, and/or
restart the camera.
Page 37 / 72
²¶
D-Link DCS-910/9±0 User Manual
Section ² - Configuration
Maintenance > Firmware Upgrade
Your current firmware version and date will be displayed on
your screen. You may go to the D-Link Support Page to check
for the latest firmware versions available.
To upgrade the firmware on your DCS-910/920, please
download and save the latest firmware version from the D-Link
Support Page to your local hard drive. Locate the file on your
local hard drive by using the
Browse
button. Then, open the file
and click the “
Upload
” button to start the firmware upgrade.
Page 38 / 72
²·
D-Link DCS-910/9±0 User Manual
Section ² - Configuration
Status > System
This section displays all the details information about
your device and network settings.
Page 39 / 72
²9
D-Link DCS-910/9±0 User Manual
Section ² - Configuration
D-ViewCam Installation
D-ViewCam software is included for the administrator to manage up to 32 D-Link IP cameras remotely. You may now use
the software to configure all the advanced settings for your cameras. D-ViewCam is a comprehensive management tool
for IP surveillance.
Insert the CD-ROM into the CD-ROM drive. A menu screen will appear as shown below.
Click
D-ViewCam
D-ViewCam provides English, Traditional Chinese and Simplified
Chinese language versions. Select a language version and click OK to
continue.
Click
OK
Page 40 / 72
³0
D-Link DCS-910/9±0 User Manual
Section ² - Configuration
Click
Next
to continue.
Click
Browse
if you would like to choose a specific folder for the
installation, otherwise click
Next
to continue.
Click
Next
Click
Next
19216811.live