Page 16 / 72
Scroll up to view Page 11 - 15
1µ
D-Link DCS-910/9±0 User Manual
Section ± - Installation
Click on the
D-Link Setup Wizard SE
icon that was created in your
Windows Start menu.
The Setup Wizard will appear and display the MAC address of
the DCS-910/920, and an IP Address (which may or may not be
correct depending on what you have your DCS-910/920 connected
to). If you have a DHCP server on your network, there will be a
valid IP Address displayed here.
Note:
A DHCP server is a device that supplies IP addresses to your
network devices automatically.
Page 17 / 72
1¶
D-Link DCS-910/9±0 User Manual
Section ² - Configuration
Setup Wizard
The following options are available on the Installation Wizard screen:
Configuration
This section will show you how to configure your new D-Link Internet camera using the D-Link Setup Wizard SE.
Click
Wizard
Your camera’s IP Address will be displayed along with its corresponding MAC Address here.
Your camera’s IP Address will
be displayed here along with its
corresponding MAC Address.
Page 18 / 72
1·
D-Link DCS-910/9±0 User Manual
Section ² - Configuration
Enter the admin ID and password.
Note:
The default Admin ID is
admin
with the password left blank.
Click
Next
Click
Next
Click
Next
Select DHCP if you want to obtain a new IP address every time the camera boots
up, or select static IP to use the same IP address at each boot up.
Enable wireless settings and enter your wireless network information. Select your
wireless security settings, and click
Next
.
Note:
Wireless is available only for the DCS-920.
Page 19 / 72
19
D-Link DCS-910/9±0 User Manual
Section ² - Configuration
Click
Next
Click
Restart
If you need to make any changes, click
Back
to modify your settings. Otherwise,
click
Restart
to save and apply your settings.
Note:
Wireless is available only for the DCS-920.
Enter your wireless encryption key and click
Next
.
Note:
Wireless is available only for the DCS-920.
Page 20 / 72
±0
D-Link DCS-910/9±0 User Manual
Section ² - Configuration
Your setup is now completed!
Click
Link
to launch the Web page of your camera, and view
the images using your Web browser.
Click
Link
Viewing Your Internet Camera
Enter
admin
as the default username and leave the password blank. Click
OK
to
continue.
The Setup Wizard will automatically open your web browser to the IP address of the
have a different IP Address.
19216811.live