D-Link DCS-1130 Router Manual PDF (Setup & Configuration Guide)

Page 26 / 50 Scroll up to view Page 21 - 25

22

D-Link DCS-1130 User Manual

Section 3 - Conﬁguration

This option allows you to set up Motion Detection on your IP camera. In

order to use motion detection, you must ﬁrst check the

Enable Video

Motion

checkbox. You can then click on the video window and draw

motion detection zones by clicking and dragging your mouse. Red areas

indicate areas that will be monitored for motion.

Sensitivity

: This setting adjusts how sensitive the camera will be to

motion, where 100% will be the most sensitive setting and 0% will be the

least sensitive setting.

Drawing Mode

: This will allow you to draw motion detection zones when

clicking and dragging, or erase motion detection zones when clicking and

dragging, depending on which option you have selected.

Clear

: Clicking this button will clear all motion detection zones.

After making any changes, click the

Save Settings

button to save your

changes, or click the

Don’t Save Settings

button to discard your changes.

Setup > Motion Detection

Page 27 / 50

23

D-Link DCS-1130 User Manual

Section 3 - Conﬁguration

This option allows you to conﬁgure, update, and maintain the correct time on the internal system clock. From this section

you can set the time zone that you are in and set the NTP (Network Time Protocol) Server. Daylight Saving can also

be conﬁgured to automatically adjust the time when needed.

Time Zone

: Select your time zone from the drop down menu.

Enable Daylight Saving

: If your region uses a Daylight Saving adjustment,

check this checkbox.

Auto Daylight Saving:

This option will adjust Daylight Saving Time

automatically.

Set date and time manually

: Selecting this will let you set the Daylight

Saving Time adjustment manually:

• Daylight Saving Offset

: This will set the Daylight Saving

adjustment that will be used.

• Daylight Saving Date

: This will set the beginning and ending

dates of the Daylight Saving period.

Synchronize with NTP Server

: Checking this checkbox will allow the

camera to automatically synchronize its clock with an NTP server.

NTP Server

: Use the dropdown box to the right to select an NTP server

to use, or you can type one in.

Set date and time manually

: Check this checkbox to set the time and date manually. You can then use the dropdown

boxes to select the current

Year

,

Month

,

Day

,

Hour

,

Minute

, and

Second

.

You can also click the

Copy Your

Computer’s Time Settings

button to automatically ﬁll in the dropdown boxes with the current time and date from your

computer.

After making any changes, click the

Save Settings

button to save your changes, or click the

Don’t Save Settings

button to discard your changes.

Setup > Time and Date

Page 28 / 50

24

D-Link DCS-1130 User Manual

Section 3 - Conﬁguration

This option allows you to conﬁgure recording settings and scheduling.

You can record video to a Samba network drive on your local network.

Enable recording:

Check this checkbox to enable the recording feature.

After enabling recording, you will need to select a scheduling method.

Samba Auth

: Here, select Anonymous if no user name or password is

required to access your Samba drive. If you require a user name and

password to log in to your Samba drive, select

Account

and ﬁll in the

following information:

User name

: Enter the user name required to access your Samba

drive.

Password

: Enter the password required to access your Samba drive.

Password conﬁrm

: Re-enter the password required to access your

Samba drive for veriﬁcation.

Server

: Enter the name or the IP of the server where your Samba drive

is located.

Shared Folder

: Enter the name of your shared folder.

Test

: Click this button to make a connection to the Samba network drive, and it will let you know if the settings work.

Note

: You can create a simple Samba network drive on your Windows PC by right-clicking a folder, selecting

Sharing

and Security…

, and selecting

Share this folder

. Enter a

Share name

you would like to use for the folder, then click the

Permissions

button and check the box for

Full Control / Allow

for the

Everyone

group. For your camera’s Recording

settings, use Anonymous for the Samba Auth, your computer’s IP address for the Server, and the Share name you

chose for the Shared Folder. Click on the Test button to test your settings.

Please note that when creating a simple network drive like this, all users on your local network will have access to the

contents of this folder.

Setup > Recording

Page 29 / 50

25

D-Link DCS-1130 User Manual

Section 3 - Conﬁguration

Recording Options

Resolution

: This will let you set which video proﬁle you wish to use to

record video. Please note that if the bitrate (bps) of the video proﬁle is

higher than your Samba network drive’s throughput, the recording’s

framerate (FPS) may be reduced.

Record until

: You can use this setting to adjust how much free space

must remain when recording. It is suggested that you set this to at least

32M to allow for enough buffer space for the camera to record with.

When storage is full

: When your storage device is full or has reached

the free space limit speciﬁed in Record until, you can choose to stop

recording, or you can have the camera delete old recordings to free space

for new recordings to be saved.

Event Based

: Event based recording will allow you to record video when

speciﬁc events happen.

Motion detection triggered recording:

Enabling this option will set the

camera to record video when motion is detected by

the camera.

Prerecord

: This will set how many seconds of video before the event

takes place will be recorded.

Postrecord

: This will set how many seconds of video after the event

takes place will be recorded.

Example:

Using motion detection triggered recording and setting Prerecord to 5 seconds and Postrecord to 9 seconds,

the camera will save video from 5 seconds before motion was detected to 9 seconds after motion was detected.

Continuous

: This will set the camera to record continuously.

Scheduled Recording

: This will set the camera to automatically record video during the speciﬁed times in the table

below.

After making any changes, click the

Save Settings

button to save your changes, or click the

Don’t Save Settings

button to discard your changes.

Page 30 / 50

26

D-Link DCS-1130 User Manual

Section 3 - Conﬁguration

Here, you can set the camera to take snapshots when motion is detected.

Snapshots can be sent to an e-mail address and/or to an FTP server.

Enable Snapshot

: Check this box to enable the snapshot feature.

Event Based (Motion Detection)

: This will set the camera to take a

snapshot whenever motion is detected.

Continuous (FTP only)

: This will set the camera to take snapshots

continuously at intervals speciﬁed in

FTP Server > Interval

below. You

can only save to an FTP server when taking continuous snapshots.

Scheduled (FTP only)

: This will set the camera to take snapshots

continuously at intervals speciﬁed in

FTP Server > Interval

below

according to schedule you deﬁne by checking days and entering the

times you want to record between. You can only save to an FTP server

when taking scheduled snapshots.

Setup > Snapshot

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share