19216811.live74
MY HOME - CONTROL
F452 and F452V
PROGRAMMING
The Web Server (F452 and F452V) is programmed with a software called
TiServer whose installation and configuration are described in detail in the
user manual in the CD supplied with the devices.
The following main parameters must be configured:
-
IP address:
This is the address for the communication of packets over the
Internet needed to identify the Web Server. This address must be static
(fixed). If static (fixed) addresses are not available contact your network
administrator. The “Subnet Mask” parameter, typical of networks which
use the TCP/IP protocol, must be set together with the IP address. In this
case also, contact your network administrator for the assignment of this
parameter.
-
login and password:
This is the identification name (login) and password
for the connection. Those entered as default in the factory are “bticino”,
which the user can modify and personalise.
-
e-mail address:
This is the address for sending electronic mail warnings
of intrusion and auxiliary alarms. The IP address of the SMTP (Simple Mail
Transfer Protocol) Server must be set and if necessary that of the mail
Router.
-
web pages:
For the management and control, via buttons which can be
personalised, of the devices of the Automation, Burglar-alarm, Energy
Management and CCTV systems via remote PC with Internet Explorer 5
browser program or similar.
Screen page of the TiServer
programme for the definition of
the features of a video camera
in the WEB Page “CCTV”
Screen page of the TiServer
programme where the number of
video cameras in the MY HOME
system is defined