19216811.live84
MY HOME - CONTROL
T1
T2
Tamper
T1
C
S in
S out
•
•
+
LU
a
a
b
b
1
2
3
4
5
6
7
1 Telephone line OUT
2 Telephone line IN
3
Local tamper (protects against the removal of the dialling device
from the bracket)
4 Tamper line:
(-/T1) protection against cutting wires and local tampering by
removing from the bracket
(-/T2) protection against cutting wires without protection against
removing from the bracket (installation in BTicino MULTIBOX
series boxes)
5 MY HOME system BUS
6 Connection to the sound system
7 Reset pushbutton
NOTE:
The dialling device is supplied with the tamper line terminals
(-/T1) circuited.
Rear view
GENERAL FEATURES - Burglar alarm control unit
with dialling device and telephone dialling device
BACK-UP BATTERIES
Before installation the dialling device must be fitted with a back-up battery
to be placed in the compartment on the back (fig. 1); its function is to
provide power when there is a power cut: the operation of the device
and the saving in the memory of the data set. Use the BTicino battery
Item 3507/6, 6V – 0.5 Ah, already fitted with cord and connector for the
connection (fig. 2).
NOTE
: battery Item 3507/6 is supplied separately.
T1
LU
a
a
b
b
BATTERY
COMPARTMENT
Fig. 2
Fig. 1
Technical data
Power supply:
from bus: from 18V to 28V
Connection to the mains:
Two wire with telephone pair
Absorption:
20 mA
Operating temperature:
5 to 40 °C
Dialling system:
only with dialling in DTMF
Telephone network:
DTMF/IMPULSES
Number of messages:
6 (4 pre-recorded which can be personalised
nd 2 which can be totally personalised)
Degree of protection:
IP 30
Number of telephones
which can be saved:
Joker number + 16
Number of telephone
commands:
4 with the simplified commands