VoIP/(802.11g) ADSL2+ Router

Chapter 4: Configuration

UPnP Portmap

The section lists all port-mapping established using UPnP (Universal Plug and Play). Please see the

Advanced

section of this manual for more details on UPnP and the router’s UPnP configuration options.

25

VoIP/(802.11g) ADSL2+ Router

Chapter 4: Configuration

Quick Start

For detailed instructions on configuring your WAN settings, please see the

WAN

section of this manual.

Usually, the only details you will need for the Quick Start wizard to get you online are your login (often in

the form of

username@ispname

), your password and the encapsulation type.

In additional, you have

the option to provide specific DNS as your desire, or check the

Enable

box to get the DNS automatically

from your ISP.

Your ISP will be able to supply all the details you need, alternatively, if you have deleted the current

WAN Connection in the

WAN – ISP

section of the interface, you can use the router’s PVC Scan feature

to attempt to determine the Encapsulation types offered by your ISP.

Click

Start

to begin scanning for encapsulation types offered by your ISP. If the scan is successful you

will then be presented with a list of supported options:

26

VoIP/(802.11g) ADSL2+ Router

Chapter 4: Configuration

Select the desired option from the list and click

Apply

to return to the Quick Start interface to continue

configuring your ISP connection. Please note that the contents of this list will vary, depending on what is

supported by your ISP.

27

VoIP/(802.11g) ADSL2+ Router

Chapter 4: Configuration

Configuration

When you click this item, you get following sub-items to configure the ADSL router.

LAN, WAN, System, Firewall, VoIP, QoS, Virtual Server, Time Schedule

and

Advanced

These functions are described below in the following sections.

LAN (Local Area Network)

There are seven items within the LAN section:

Bridge Interface, Ethernet, Ethernet Client Filter,

Wireless, Wireless Security, Wireless Client Filter, Port Setting

and

DHCP Server

.

Bridge Interface

You can setup member ports for each VLAN group under Bridge Interface section. From the

example, two VLAN groups need to be created.

Ethernet: P1 (Port 1)

Ethernet1: P2, P3 and P4 (Port 2, 3, 4) Please uncheck P2, P3, P4 from Ethernet VLAN port first.

Note: You should setup each VLAN group with caution. Each Bridge Interface is arranged in

this order.

Ethernet

P1 / P2 / P3 / P4

Ethernet2

P3 / P4

Management Interface:

To specify which VLAN group has possibility to do device

management, like doing web management.

Note: NAT/NAPT can be applied to management interface only.

28

VoIP/(802.11g) ADSL2+ Router

Chapter 4: Configuration

Ethernet

Primary IP Address

IP Address:

The default IP on this router.

SubNetmask:

The default subnet mask on this router.

RIP:

RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.

IP Alias

This function supports to create multiple virtual IP interfaces on this router. It helps to connect two or

more local networks to the ISP or remote node. In this case, an internal router is not required.

IP Address:

Specify an IP address on this virtual interface.

SubNetmask:

Specify a subnet mask on this virtual interface.

Security Interface:

Specify the firewall setting on this virtual interface.

Internal:

The network is behind NAT. All traffic will do network address translation when

sending out to Internet if NAT is enabled.

External:

There is no NAT on this IP interface and connected to the Internet directly.

Mostly it will be used when providing multiple public IP addresses by ISP. In this case, you

can use public IP address in local network which gateway IP address point to the IP

address on this interface.

DMZ:

Specify this network to DMZ area. There is no NAT on this interface.

29