Page 61 / 126
Scroll up to view Page 56 - 60
60
Step 7:
WPS set up complete. And you have set up security-enabled Wi-Fi networks.
Page 62 / 126
61
Set up of security-enabled Wi-Fi network using WCN in Vista
Step 1:
Note down the AP’s PIN from Web (Ex: 78749887).
Step 2:
Set WPS State to “Unconfigured” at Wireless page and click “Apply”.
Step 3:
In Vista`s Control Panel, select
Network and Internet and
choose
View network
computers and devices
. Double click the “ADSL Firewall Router” icon and enter the AP`s
PIN code then click “Next”.
Page 63 / 126
62
Step 4:
Enter the AP SSID and apply “Next” button.
Page 64 / 126
63
Step 5:
Enter the Passphrase and apply “Next” button.
Step 6:
WCN set up complete. And you have set up security-enabled Wi-Fi networks.
Page 65 / 126
64
Adding a new WPS device (wireless client) to a network - Use PBC
Method
Step 1:
Push AP’s WPS button more than one second and you will see AP’s WLAN led will
flashing per second.
Step 2:
Open wireless client’s WPS utility, select “Join a wireless network” and apply “next”
button.
Note: After you push AP’s WPS button, below steps should be completed between 2
minutes.
Step 3:
Select “Push the button on my access point” and apply “next” button.
19216811.live