1. Home
    2. /
  2. Manuals
    3. /
  3. Billion
    4. /
  4. BiPAC-7300GX
    5. /
  5. 9
Page 41 / 126 Scroll up to view Page 36 - 40
40
System Up-Time:
Records system up-time.
Current time:
Set the current time. See the Time Zone section for more information.
Hardware Version:
Device version.
Software Version:
Firmware version.
MAC Address:
The LAN MAC address.
WAN
Port:
Name of the WAN connection.
Protocol VPI/VCI:
Virtual Path Identifier and Virtual Channel Identifier
Operation:
The current status in WAN interface.
Connection:
The current connection status.
IP Address:
WAN port IP address.
Net mask:
WAN port IP subnet mask.
Gateway: The IP address of the default gateway.
Primary DNS: The IP address of the primary DNS server.
Port Status
Port Status
：
User can look up to see if they are connected to Ethernet, ADSL, 3G or
Wireless.
Page 42 / 126
41
5.1.1 ADSL Status
DSP Firmware Version:
DSP code version
DMT Status:
Current DMT Status
Operational Mode:
To show the state when user select “AUTO” on connect mode.
Upstream:
Upstream rate.
Downstream:
Downstream rate.
Noise Margin (Upstream):
This is noise margin in upstream.
Noise Margin (Downstream):
This is noise margin in downstream.
Attenuation (Upstream):
This is attenuation of signal in upstream.
Attenuation (Downstream):
This is attenuation of signal in downstream.
ADSL Mode:
There are four modes “
Open Annex Type and Follow DSLAM’s
Setting
”, ”
Annex A
”, ”
Annex L
”,
”
Annex M
” and
“Annex J”
that user can select for this
connection.
Modulator:
There are seven modes “
AUTO
”,”
ADSL
multimode
”,”
ADSL2
”, ”
ADSL2+
”,”
G.Lite
”, “
T1.413
” and “
G.DMT
” that user can select for
this connection.
Page 43 / 126
42
5.1.2 3G Status
This section displays the 3G Card’s overall status, which shows you a number of helpful
information such as the current signal strength and statistics on current and total bytes
transferred and received.
Status:
The current status of the 3G card.
Signal Strength:
The signal strength bar indicates current 3G signal strength.
Network Name:
The network name that the device is connected to.
Network Mode:
The current operation mode in 3G card, it depends on service provider
and card’s limitation. It may be UMTS (3G),GPRS, EDGE, or GSM .
Card Name: The name of the 3G card.
Card Firmware: The current firmware for the 3G card.
Current TX Bytes / Packets:
The statistics of transmission, count for this call.
Current RX Bytes / Packets:
The statistics of receive, count for this call.
Total TX Bytes / Packets:
The statistics of transmission, count from system ready
Total RX Bytes / Packets:
The statistics of receive, count from system ready
Clear:
Click Clear button to reset the statistics value of Total TX/RX.
Page 44 / 126
43
5.1.2 ARP Table
This section displays the router’s ARP (Address Resolution Protocol) Table, which shows
the mapping of Internet (IP) addresses to Ethernet (MAC) addresses. This is useful as a
quick way of determining the MAC address of the network interface of your PCs to use with
the router’s
Firewall – MAC Address Filter
function. See the Firewall section of this
manual for more information on this feature.
IP Address:
It is IP Address of internal host that join this network.
MAC Address:
The MAC address of internal host.
Page 45 / 126
44
5.1.3 DHCP Table
IP Address:
The current corresponding DHCP-assigned dynamic IP address of the
device.
MAC Address:
The MAC Address of internal dhcp client host.
Client Host Name:
The Host Name of internal dhcp client.
Register Information:
Register time information

Rate

3.5 / 5 based on 2 votes.

Popular Billion Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top