Page 66 / 126
Scroll up to view Page 61 - 65
65
Step 4:
New WPS device have join into the wireless network.
Adding a new WPS device (wireless client) to a network - Use PIN
Method
Step 1:
Open wireless client’s WPS utility, select “Join a wireless network” and apply “next”
button.
Page 67 / 126
66
Step 2:
Note down the wireless client’s PIN (Ex: 41538142) and apply “Start” button for
active wireless client WPS PIN method.
Step 3:
Enter wireless client’s PIN into “Enrollee’s PIN” of Web and apply “Start” button.
Step 4:
New WPS device have join into the wireless network.
Page 68 / 126
67
Adding a new WPS device (wireless client) to a network - Use PIN
Method
Step 1:
Open wireless client’s WPS utility, select “Join a wireless network” and apply “next”
button.
5.3.1.6 DHCP Server
You can disable or enable the DHCP (Dynamic Host Configuration Protocol) server or
enable the router’s DHCP relay functions. The DHCP protocol allows your router to
dynamically assign IP addresses to PCs on your network if they are configured to obtain IP
addresses automatically.
DHCP Server Mode: Disable
To disable the router’s DHCP Server, check
Disabled
and then click
Apply.
When the
DHCP Server is disabled, you will need to manually assign a fixed IP address to each PC
on your network, and set the default gateway for each PC to the IP address of the router
(the default is 192.168.1.254).
Page 69 / 126
68
DHCP Server Mode: DHCP Server
To configure the router’s DHCP Server, check
DHCP Server
. You can then configure
parameters of the DHCP Server including the IP pool (starting IP address and ending IP
address to be allocated to PCs on your network), lease time for each assigned IP address
(the period of time the IP address assigned will be valid), DNS IP address and the gateway
IP address. These details are sent to the DHCP client (i.e. your PC) when it requests an IP
address from the DHCP server. Click
Apply
to enable this function. If you check “
Use
Router as a DNS Server
”, the ADSL Router performs the domain name lookup, finds the
IP address from the outside network automatically and forwards it back to the requesting
PC in the LAN (your Local Area Network).
DHCP Server Mode: DHCP Relay
If you check
DHCP Relay
and then you must enter the IP address of the DHCP server
Page 70 / 126
69
which assigns an IP address back to the DHCP client in the LAN. Use this function only if
advised to do so by your network administrator or ISP. Click
Apply
to enable this function.
19216811.live