1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D9231-4v1
    5. /
  5. 19
Page 91 / 98 Scroll up to view Page 86 - 90
89
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
8
10
9
TROUBLESHOOTING
Problem:
I am NOT using a Belkin client card for a home network and I am having difficulty setting up Wireless Protected Access (WPA) security�
Solution:
If you are not using a Belkin Wireless Desktop or Wireless Notebook Network Card that is not equipped with WPA-enabled software, a file from
Microsoft called “Windows XP Support Patch for Wireless Protected Access” is available for free download� Download the patch from Microsoft by
searching the knowledge base for Windows XP WPA�
Note:
The file that Microsoft has made available works only with Windows XP� Other operating systems are not supported at this time� You also need
to ensure that the wireless card’s manufacturer supports WPA and that you have downloaded and installed the latest driver from their support site�
Supported Operating Systems:
•
Windows XP Professional
•
Windows XP Home Edition
2�
Right-clicking on the
“Wireless Networks” tab will
display the following screen�
Ensure the “Use Windows
to configure my wireless
network settings” check box
is checked�
1�
Under Windows XP, click
“Start > Control Panel >
Network Connections”�
Page 92 / 98
90
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
8
10
9
TROUBLESHOOTING
3�
Under the “Wireless
Networks” tab, click the
“Configure” button and you
will see the following screen�
4�
For a home or small
business user, select
“WPA-PSK” under
“Network Administration”�
Note:
Select WPA (with radius
server) if you are using this
computer to connect to a
corporate network that supports
an authentication server such as
a radius server� Please consult
your network administrator for
further information�
5�
Type in your encryption key
in the “Network key” box�
Important:
Enter your pre-shared
key� This can be from eight to 63
characters and can be letters,
numbers, or symbols� This same
key must be used on all of the
clients that you set up�
6�
Click “OK” to apply settings�
Page 93 / 98
91
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
8
10
9
TROUBLESHOOTING
What’s the difference between 802�11g and draft 802�11n?
Currently there are three commonly used wireless networking standards,
which transmit data at very different maximum speeds� Each is based
on the designation for certifying network standards� The most common
wireless networking standard, 802�11g, can transmit information up
to 54Mbps; 802�11a also supports up to 54Mbps, but in the 5GHz
frequency; and 802�11n draft specification can connect at up to
300Mbps� See the following chart for more detailed information�
Wireless
Technology
G
(802�11g)
G+
(1x1 draft
802�11n)
N MIMO
(draft 802�11n
with
MIMO)
N1 MIMO
(draft 802�11n
with
MIMO)
Speed/Data
Rate*
Up to 54Mbps*
Up to 150Mbps*
Up to 300Mbps*
Up to 300Mbps*
Frequency
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with
the unlicensed
band 2�4GHz
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with
the unlicensed
band 2�4GHz
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with
the unlicensed
band 2�4GHz
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with
the unlicensed
band 2�4GHz
Compatibility
Compatible with
802�11b/g
Compatible
with 802�11b/g,
draft 802�11n,
and Belkin G+
MIMO
Compatible with
draft 802�11n
and 802�11b/g
Compatible with
draft 802�11n
and 802�11b/g
Coverage*
Up to 400 ft�*
Up to 600 ft�*
Up to 1,200 ft�*
Up to 1,400 ft�*
Advantage
Common—
widespread
use for Internet
sharing
Better coverage
and consistent
speed and
range
Enhanced
speed and
coverage
Leading edge—
best coverage
and throughput
*Distance and connection speeds will vary depending on your networking environment�
Technical Support
You can find technical support information at http://www�belkin�com/
networking or
www�belkin�com/support/
�
Wireless Comparison Chart
Page 94 / 98
92
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
8
9
INFORMATION
10
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules� These
limits are designed to provide reasonable protection against harmful
interference in a residential installation�
This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications� However,
there is no guarantee that interference will not occur in a particular
installation� If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try and correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna�
•
Increase the distance between the equipment and the receiver�
•
Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected�
•
Consult the dealer or an experienced radio/TV technician for help�
For IEEE 802�11b/g products in the USA market, only channels 1 through
11 can be operated� Selection of other channels is not possible�
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter�
We, Belkin International, Inc�, of 501 West Walnut Street, Compton, CA
90220, declare under our sole responsibility that the device,
F5D9231-4v2
complies with Part 15 of the FCC Rules� Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation�
Caution: Exposure to Radio Frequency Radiation
The device shall be used in such a manner that the potential for human
contact during normal operation is minimized�
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment� This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and
your body�
Page 95 / 98
93
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
8
9
10
INFORMATION
Modifications
The FCC requires the user to be notified that any changes or
modifications to this device that are not expressly approved by
Belkin International, Inc�, may void the user’s authority to operate the
equipment�
Canada-Industry Canada (IC)
The wireless radio of this device complies with RSS139 and RSS 210
Industry Canada� This Class B digital apparatus complies with Canadian
ICES-003�
Operation is subject to the following two conditions:
1)
this device may not cause interference, and
2)
this device must accept any interference, including interference
that may cause undesired operation of the device�
Cet appareil numérique de la classe B conforme á la norme NMB-003
du Canada�
Europe-European Union Notice
Radio products with the CE 0682 or CE alert marking comply with
the R&TTE Directive (1995/5/EC) issued by the Commission of the
European Community�
Compliance with this directive implies conformity to the following
European Norms (in brackets are the equivalent international standards)�
•
EN 60950-1 (IEC60950) – Product Safety
•
EN 300 328 Technical requirement for radio equipment
•
EN 301 489 General EMC requirements for radio equipment�
To determine the type of transmitter, check the identification label on
your Belkin product�
Products with the CE marking comply with the EMC Directive (89/336/
EEC) and the Low Voltage Directive (72/23/EEC) issued by the
Commission of the European Community� Compliance with these
directives implies conformity to the following European Norms (in
brackets are the equivalent international standards)�
•
EN 55022 (CISPR 22) – Electromagnetic Interference
•
EN 55024 (IEC61000-4-2,3,4,5,6,8,11) – Electromagnetic Immunity
•
EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics
•
EN 61000-3-3 (IEC610000) – Power Line Flicker
•
EN 60950-1 (IEC60950-1) – Product Safety
Products that contain the radio transmitter are labeled with CE 0682 or
CE alert marking and may also carry the CE logo�

Rate

3.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top