1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D9231-4v1
    5. /
  5. 15
Page 71 / 98 Scroll up to view Page 66 - 70
69
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
Enabling/Disabling UPnP
UPnP (Universal Plug-and-Play) is yet another advanced feature offered
by your Belkin Router� It is a technology that offers seamless operation
of voice messaging, video messaging, games, and other applications
that are UPnP-compliant� Some applications require the Router’s firewall
to be configured in a specific way to operate properly� This usually
requires opening TCP and UDP ports, and in some instances, setting
trigger ports� An application that is UPnP-compliant has the ability to
communicate with the Router, basically “telling” the Router which way
it needs the firewall configured� The Router ships with the UPnP feature
disabled� If you are using any applications that are UPnP-compliant, and
wish to take advantage of the UPnP features, you can enable the UPnP
feature� Simply select “Enable” in the “UPnP Enabling” section of the
“Utilities” page� Click “Apply Changes” to save the change�
Enabling/Disabling Auto Firmware Update
This innovation provides the Router with the built-in capability to
automatically check for a new version of firmware and alert you that
the new firmware is available� When you log into the Router’s advanced
interface, the Router will perform a check to see if new firmware is
available� If so, you will be notified� You can choose to download the
new version or ignore it�
Page 72 / 98
70
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
MANUALLY CONFIGURING NETWORK SETTINGS
7
Set up the computer that is connected to the cable or DSL modem FIRST using these steps� You can also use these steps to add computers to your
Router after the Router has been set up to connect to the Internet�
Manually Configuring Network Settings in Mac OS up to 9�x
In order for your computer to properly communicate with your Router, you will need to change your Mac computer’s TCP/IP settings to DHCP�
(1)
(2)
3�
Next to “Configure”
(2)
, if
“Manually” is selected, your
Router will need to be set
up for a static IP connection
type� Write the address
information in the table
below� You will need to enter
this information into the
Router�
4�
If not already set, at “Configure:”, choose “Using DHCP Server”�
This will tell the computer to obtain an IP address from the Router�
5�
Close the window� If you
made any changes, the
following window will
appear� Click “Save”�
Restart the computer� When the computer restarts, your network
settings are now configured for use with the Router�
1�
Pull down the Apple menu� Select “Control Panels” and select
“TCP/IP”�
2�
You will see the TCP/IP control panel� Select “Ethernet Built-In” or
“Ethernet” in the “Connect via:” drop-down menu
(1)
�
Page 73 / 98
71
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
7
MANUALLY CONFIGURING NETWORK SETTINGS
Manually Configuring Network Settings in Mac OS X
3�
Select “Built-in Ethernet”
(1)
next to “Show” in the “Network”
menu�
4�
Select the “TCP/IP” tab
(2)
� Next to “Configure:”
(3)
, you should see
“Manually” or “Using DHCP”� If you do not, check the PPPoE tab
(4)
to make sure that “Connect using PPPoE” is NOT selected� If it
is, you will need to configure your Router for a PPPoE connection
type using your user name and password�
1�
Click on the “System
Preferences” icon�
2�
Select “Network” from the “System Preferences” menu�
(1)
(3)
(4)
(2)
Page 74 / 98
72
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
7
MANUALLY CONFIGURING NETWORK SETTINGS
5�
If “Manually” is selected,
your Router will need to
be set up for a static IP
connection type� Write the
address information in the
table below� You will need
to enter this information into
the Router�
(1)
(3)
(4)
(2)
6�
If not already selected, select “Using DHCP” next to “Configure:”
(3)
, then click “Apply Now”�
Your network adapter(s) are now configured for use with the Router�
Page 75 / 98
73
G
+
Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
7
MANUALLY CONFIGURING NETWORK SETTINGS
Manually Configuring Network Settings in Windows 2000, NT, XP, or Vista
1�
Click “Start”, “Settings”, then “Control Panel”�
2�
Double-click on the “Network and dial-up connections” icon
(Windows 2000) or the “Network” icon (Windows XP or Vista)�
3�
Right-click on the “Local Area Connection” associated with your
network adapter and select “Properties” from the drop-down
menu�
4�
In the “Local Area Connection Properties” window, click “Internet
Protocol (TCP/IP)” and click the “Properties” button� The screen on
the right will appear�
5�
If “Use the following IP address”
(2)
is selected, your Router
will need to be set up for a static IP connection type� Write the
address information in the table below� You will need to enter this
information into the Router�
6�
If not already selected, select “Obtain an IP address automatically”
(1)
and “Obtain DNS server address automatically”
(3)
� Click “OK”�
Your network adapter(s) are now configured for use with the Router�
(1)
(2)
(3)

Rate

3.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top