Page 96 / 149
Scroll up to view Page 91 - 95
Chapter 7 - Configuring Local Address Parameters
DHCP Server
BreezeMAX Si 4000 CPE
82
Operator Manual
7.2
DHCP Server
The unit has a built-in DHCP server that can be used for managing the
distribution of IP addresses for the devices connected to the LAN Port of the
device. In the DHCP Server page you set DHCP parameters for dynamic IP
assignment.
Enable DHCP Server
- Select this check-box dynamically assign a leased IP
address to clients that connect to the device from the local network. This
option is applicable to IP CS modes only. For Bridge (Eth CS) this option is
disabled.
DHCP Server IP Address
- Enter a DHCP server IP address. The default
DHCP Starting IP Address
- Enter the first IP address assigned by the DHCP
server. The default address is 192.168.254.1.
DHCP Ending IP Address
- Enter the last IP address assigned by the DHCP
server. The default address is 192.168.254.5.
Figure 7-1: DHCP Server
Page 97 / 149
Chapter 7 - Configuring Local Address Parameters
DHCP Server
BreezeMAX Si 4000 CPE
83
Operator Manual
DHCP Lease Time
- Set the time for renewing the IP Lease. Default:
15minutes.
Page 98 / 149
Chapter 7 - Configuring Local Address Parameters
Lease Status
BreezeMAX Si 4000 CPE
84
Operator Manual
7.3
Lease Status
The Lease Status page displays information regarding the leased IP address(es):
Client Host PC Name
Host PC MAC Address
IP Address
Remaining Lease Duration (seconds)
Click
Refresh
to display the updated information of the client host PC.
Click
Auto
to refresh the information automatically.
Figure 7-2: Lease Status
Page 99 / 149
Chapter 7 - Configuring Local Address Parameters
Lease Reservation
BreezeMAX Si 4000 CPE
85
Operator Manual
7.4
Lease Reservation
The Lease Reservation page displays information on reserved IP addresses for
leasing. In this page you assign the specific IP addresses to the specific client
device connected to the LAN port. You can also add, delete, or modify the
reservation settings.
Select
- Select an IP to delete.
Host Name
- Enter a name to the host
MAC Address
- Add a device MAC address
IP Address
- Specify a reservation IP address for a specified MAC address
Enabled
- Select if to enable or disable a specified IP setting.
Figure 7-3: Lease Reservation
Page 100 / 149
Chapter 7 - Configuring Local Address Parameters
Lease Reservation
BreezeMAX Si 4000 CPE
86
Operator Manual
Use the
Add
or
Delete
buttons to add or clear reserved IPs for leasing. Click
Apply
to activate your changes.
19216811.live