1. Home
    2. /
  2. Manuals
    3. /
  3. Alvarion
    4. /
  4. WIXFBR-103X187
    5. /
  5. 17
Page 81 / 149 Scroll up to view Page 76 - 80
Chapter 6 - Displaying Status Details
Device Status
BreezeMAX Si 4000 CPE
67
Operator Manual
6.2
Device Status
This page displays the status of the unit such as system uptime and WAN
information.
Click
Refresh
to display the current device status.
Click
Auto
to update the status information periodically.
The following information is displayed:
Figure 6-1: Status - Device Status
Table 6-1: Device Status Parameters
Item
Description
Operation Mode
The mode for forwarding data packets from the service
provider’s WiMAX network to the local network, as defined in
“Setting Basic Parameters” on page 43
. Available
option: Router.
Connection Mode
Connection type for the unit, as defined in
“Setting Basic
Parameters” on page 43
. Available options: DHCP, Static
Page 82 / 149
Chapter 6 - Displaying Status Details
Device Status
BreezeMAX Si 4000 CPE
68
Operator Manual
IP Address
WAN IP address, if the Static connection mode was selected,
as defined in
“Setting Basic Parameters” on page 43
.
For DHCP mode - IP address acquired on the WAN interface
is displayed. Otherwise it is 0.0.0.0
MAC
WAN MAC Address
IP Subnet Mask
The IP subnet mask, if the Static connection mode was
selected, as defined in
“Setting Basic Parameters” on
page 43
, For DHCP mode - IP address acquired on the WAN
interface is displayed. Otherwise it is 0.0.0.0
IP Default Gateway
The IP Default Gateway, if the Static connection mode was
selected, as defined in
“Setting Basic Parameters” on
page 43
. For DHCP mode - IP address acquired on the WAN
interface is displayed. Otherwise it is 0.0.0.0
IP Connection
IP is connected to the network (On/Off)
Firewall
Firewall enabled or disabled (on/off), as set in
“Firewall” on
page 90
.
Lease Obtained-Data
Date of obtaining the device leasing.
Lease Expires-Data
Date of device leasing expiration.
DNS Server
The Domain Name Server address
Time Server
The NTP (Network Time Protocol) server address
Device Up Time
Duration of device function (xdays yhours zminutes)
Device Restart Reason
The reason for last device reebot (e.g. Software Upgrade)
Serving BSID
Base Station ID number (e.g. 00:01:21:00:03:5A)
RSSI
Currently received signal strength indication (e.g. 78 dBm)
CINR
Carrier to Interference-plus-Noise Ratio [in decibels (dB)] (e.g.
13 dB). This value should be maximized for best signal quality.
Table 6-1: Device Status Parameters (Continued)
Item
Description
Page 83 / 149
Chapter 6 - Displaying Status Details
WiMAX Status
BreezeMAX Si 4000 CPE
69
Operator Manual
6.3
WiMAX Status
The WiMAX Status displays a summary of the WiMAX network connection
parameters.
Click
Refresh
to display the current WiMAX connection status.
Click
Auto
to update the status information periodically (every 10 seconds)
Figure 6-2: Status - WiMAX Status
Page 84 / 149
Chapter 6 - Displaying Status Details
WiMAX Status
BreezeMAX Si 4000 CPE
70
Operator Manual
The following table describes the WiMAX Status parameters:
Table 6-2: WiMAX System Parameters
Parameter
Description
Possible values
WiMAX System
State
The status of WiMAX connection.
Network Entry - the unit has just
been connected to the network
Operational - the unit is functional
Scan - the unit scans the network
Idle - the unit is de-registered from
the network, however will continue to
scan the network and keep track of
its location
BSID
Base Station ID
Depends on the BS to which the unit is
connected
CINR
Carrier to Interference-plus-Noise Ratio
[in decibels (dB)] - a measurement of
signal effectiveness.
A greater value
will improve the connection speed.
0-35 dB
Security
Network security technologies and
protocols status
Authorized - has authentication settings
Unauthorized - without authentication
setting
Bandwidth
Depending on unit model: 5000, 7000, or
10000
Max Tx Power
Maximum uplink transmit power
Max RSSI
Maximum received signal strength
indication
-35 to -100 dBm
Max CINR
Maximum Carrier to
Interference-plus-Noise Ratio
Connection Time
Time (in seconds) during which the unit
is connected to the BS
Page 85 / 149
Chapter 6 - Displaying Status Details
WiMAX Status
BreezeMAX Si 4000 CPE
71
Operator Manual
Scan Type
The method by which the network is
scanned
Fullband - The system will try to scan
the whole frequency band.
CAPL - Channel Allocation Priority
Level. The system allocates priority
to channels for scanning order.
Neighbor - The system will try to
scan the neighbor BS to the previous
BS defined in “Last good BS”. The
neighbor BS details will appear in the
table of this section.
History - The system will try to scan
with the previous good BS to speed
up the scan duration. A “good BS” is
defined as one with which the unit
can get an IP address.
RSSI
Currently received signal strength
indication
-35 to -100 dBm
Temperature
Unit’s temperature
Overheat
Indication of temperature higher than
40°
TxPwr
Current uplink transmit power
Min Tx Power
Minimum uplink transmit power
Min RSSI
Minimum received signal strength
indication
Min CINR
Minimum Carrier to
Interference-plus-Noise Ratio
Center Frequency
The middle frequency of the bandwidth
of a channel.
WiMAX TX
Data Rate
The level of available data throughput
that can actually be provided to an
end-user.
Packets
Number of carried blocks of data
BE bytes
Total number of bytes sent on Best
Effort connection
UGS bytes
Total number of bytes sent on
Unsolicited Grant Service connection
Table 6-2: WiMAX System Parameters (Continued)
Parameter
Description
Possible values

Rate

4 / 5 based on 1 vote.

Popular Alvarion Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top