1. Home
    2. /
  2. Manuals
    3. /
  3. Alvarion
    4. /
  4. WIXFBR-103X187
    5. /
  5. 18
Page 86 / 149 Scroll up to view Page 81 - 85
Chapter 6 - Displaying Status Details
WiMAX Status
BreezeMAX Si 4000 CPE
72
Operator Manual
ERTPS bytes
Total number of bytes sent on ERTPS -
Extended Real-time Polling Service
data packets.
TX bytes
Total of uplink transmitted bytes
WiMAX RX
Data Rate
The level of available data throughput
that can actually be provided to an
end-user.
Packets
Number of carried blocks of data
BE bytes
Total number of bytes sent on Best
Effort data packets
UGS bytes
Total number of bytes sent on
Unsolicited Grant Service data packets
ERTPS bytes
Total number of bytes sent on Extended
Real-time Polling Service data packets
RX bytes
Total of downlink transmitted bytes
WiMAX PHY
DL Mode
Downlink connection mode
SISO, MIMO, MiMO A, MIMO B
DL max mcs
Maximum modulation reached
DL min mcs
Minimum modulation reached
DL mcs
Current modulation
UL max mcs
Maximum modulation reached
UL min mcs
Minimum modulation reached
UL mcs
Current modulation
List of various modulations:
QPSK DL/UL PDUs
16QAM DL/UL PDUs
64QAM DL/UL PDUs
Number of packets in this modulation
TX Service Flow / Rx Service Flow
Type
The service flow type
Best effort, ERT, NRT, UGS
SFID
Service flow ID
CID
Connection ID
Table 6-2: WiMAX System Parameters (Continued)
Parameter
Description
Possible values
Page 87 / 149
Chapter 6 - Displaying Status Details
WiMAX Status
BreezeMAX Si 4000 CPE
73
Operator Manual
DropPackets (Tx only)
Number of packets that were dropped
DropBytes (Tx only)
Number of packets that were dropped
Table 6-2: WiMAX System Parameters (Continued)
Parameter
Description
Possible values
Page 88 / 149
Chapter 6 - Displaying Status Details
Software Status
BreezeMAX Si 4000 CPE
74
Operator Manual
6.4
Software Status
The Software page enables installing or removing IPKGs (Itsy Package
Management System) - lightweight package management systems that allows for
dynamic installation/removal of packages on a running system.
To install an IPKG - Click
Browse
to load and install an Itsy Package
Management System and click
Upgrade
.
To remove an IPKG - Click
Remove
next to the component to be deleted.
The page also displays the current software items installed by the operator on the
device. These are read-only items that cannot be edited/removed
NOTE
Use this page only upon instructions from Alvarion.
Figure 6-3: Status - Software
Page 89 / 149
Chapter 6 - Displaying Status Details
Telephony Status
BreezeMAX Si 4000 CPE
75
Operator Manual
6.5
Telephony Status
This page displays information on the telephone line status.
The information displayed in this window is:
SIP User IP address
- IP address of the Session Initiation Protocol, an
application-layer control protocol that can establish, modify, and terminate
multimedia sessions such as Internet telephony calls (VOIP).
Line 1 Status
- Registered or De-registered in the SIP server
DSP Version
- current version of the voice chip in the Data Signal Processor
(DSP).
Click
Refresh
to display the current telephony status.
Click
Auto
to update the status information periodically (every 10 seconds).
Figure 6-4: Status - Telephony Status
Page 90 / 149
Chapter 6 - Displaying Status Details
Certificate Status
BreezeMAX Si 4000 CPE
76
Operator Manual
6.6
Certificate Status
The Certificate page displays available certificates information, such as serial
number, issuer and receiver, type and expiration date. Root CA certificates can be
added or deleted using this page.
The page displays the following information in a table:
»
Certificate Serial Number
»
Issued to
»
Issued by
»
Expiry Date - the date for certificate expiration. The format is
mm/dd/yyyy.
»
Certificate type
»
Edit - option to remove a certificate from the list
Figure 6-5: Status - Certificate

Rate

4 / 5 based on 1 vote.

Popular Alvarion Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top