1. Home
    2. /
  2. Manuals
    3. /
  3. Alvarion
    4. /
  4. WIXFBR-103X187
    5. /
  5. 24
Page 116 / 149 Scroll up to view Page 111 - 115
9
Chapter
Engineering
zzAlvarion_ page
Page 117 / 149
Chapter 9 - Engineering
BreezeMAX Si 4000 CPE
103
Operator Manual
In this chapter:
“Introduction” on page 104
“WiMAX Configuration” on page 105
“Device Configuration” on page 109
“VoIP Configuration” on page 110
“DM (Device Management) Settings (TR-069)” on page 119
“Function Settings” on page 121
Page 118 / 149
Chapter 9 - Engineering
Introduction
BreezeMAX Si 4000 CPE
104
Operator Manual
9.1
Introduction
The Engineering menu item is accessible to the Operator only and provides
advanced CPE configuration parameters. The Engineering mode is available in a
software package that is uploaded from the Status page; See
“WiMAX Status” on
page 69
).
For detailed description of terms and abbreviations, refer to the
“Glossary” on
page 127
.
Page 119 / 149
Chapter 9 - Engineering
WiMAX Configuration
BreezeMAX Si 4000 CPE
105
Operator Manual
9.2
WiMAX Configuration
In this page the operator defines WiMAX parameters for the CPE WiMAX
connection functionality.
Figure 9-1: Engineering - WiMAX Config.
Page 120 / 149
Chapter 9 - Engineering
WiMAX Configuration
BreezeMAX Si 4000 CPE
106
Operator Manual
The following table describes the WMAX Configuration parameters:
Table 9-1: WMAX Config. Settings
Parameter
Description
Default
Possible Values
Common Settings
Enable Idle Mode
Select this checkbox to enable Idle
Mode -the CPE is completely
deregistered from the network, however
will continue to scan the network and
keep track of its location
Enable
Enable/disable
Enable Handover
Select this checkbox to enable
Handover - transfer to another BS during
mobility
Enable
Enable/disable
Enable WiMAX Supplicant
Root CA
IOT AAA root certificates are predefined
in the CPE. Select this checkbox to allow
the CPE to verify BS's certification.
Disable
Enable/disable
Enable WiMAX Supplicant
Random ID
Select this checkbox to assign a random
ID to the Supplicant. If disabled - the ID
is the MAC_Address@realm.
Enable
Enable/disable
Enable WiMAX Supplicant
Anonymous ID
If enabled, the unit will use "WiMAX
Supplicant Anonymous ID" as
anonymous identity, else the unit will use
MAC_Address@realm instead.
Disable
Enable/disable
WiMAX Supplicant
Anonymous ID
Enter the WiMAX Supplicant
Anonymous ID to be used.
anonymous
_identity
Up to 128 characters
Realm
The WiMAX domain
WiMax.com
Enable WiMAX NAP Filter
Enables filtering Network Access
Provider. If it is enabled - network
provider ID will be checked for network
entry.
Disable
Enable/disable

Rate

4 / 5 based on 1 vote.

Popular Alvarion Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top