1. Home
    2. /
  2. Manuals
    3. /
  3. Allied-Telesis
    4. /
  4. AT-iMG624A
    5. /
  5. 184
Page 916 / 998 Scroll up to view Page 911 - 915
PPPoA
PPPoA command reference
iMG/RG Software Reference Manual (ADSL Port)
8-146
Description
This command applies to existing PVC transports - it does not apply to SVC transports.
This command sets the
Virtual Circuit Identifier
.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> pppoa set transport pppoa4 vci 800
See also
PPPOA LIST TRANSPORTS
PPPOA SHOW TRANSPORT
PPPOA SET TRANSPORT VPI
8.8.1.1.42 PPPOA SET TRANSPORT VPI
Syntax
PPPOA SET TRANSPORT {<name>|<number>} VPI <vpi>
Description
This command applies to existing PVC transports - it does not apply to SVC trans-
ports.This command sets the
Virtual Path Identifier
.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option
Description
Default Value
name
An existing PPPoA transport. To display transport names,
use the
PPPOA LIST TRANSPORTS
command.
N/A
number
An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS
com-
mand.
N/A
vci
Part of the ATM header. The VCI is a tag that identifies
which channel a cell will travel over. The VCI can be any
value between 1 and 65535.
N/A
Option
Description
Default Value
name
An existing PPPoA transport. To display transport
names, use the
PPPOA LIST TRANSPORTS
com-
mand.
N/A
number
An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS
com-
mand.
N/A
vpi
A field in the ATM header. The VPI is used to identify
the virtual path that a circuit belongs to. The VPI can be
any value between 0 and 4095.
N/A
Page 917 / 998
PPPoA command reference
PPPoA
8-147
iMG/RG Software Reference Manual (ADSL Port)
Example
--> pppoa set transport pppoa3 vpi 0
See also
PPPOA LIST TRANSPORTS
PPPOA SHOW TRANSPORT
PPPOA SET TRANSPORT VCI
8.8.1.1.43 PPPOA SET TRANSPORT WELOGIN
Syntax
PPPOA SET TRANSPORT {<name>|<number>} WELOGIN
{NONE|AUTO|PAP|CHAP}
Description
This command sets the authentication protocol used to connect to external PPP servers
(dial-out).
Options
The following table gives the range of values for each option thatcan be specified with this
command and a default value (if applicable).
Example
--> pppoa set transport pppoa2 theylogin pap
See also
PPPOA SET TRANSPORT THEYLOGIN
PPPOA SHOW TRANSPORT
PPPOA LIST TRANSPORTS
Option
Description
Default Value
name
An existing PPPoA transport. To display transport
names, use the
PPPOA LIST TRANSPORTS
com-
mand.
N/A
number
An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS
com-
mand.
N/A
none
No authentication method is used.
None
auto
The authentication protocol used by the remote PPP
server is discovered and used.
pap
Password Authentication Protocol
; the server
sends an authentication request to the remote user dial-
ing in. PAP passes the unencrypted username and pass-
word and identifies the remote end.
chap
Challenge Handshake Authentication Protocol
;
the server sends an authentication request to the
remote user dialing in. PAP passes the encrypted user-
name and password and identifies the remote end.
Page 918 / 998
PPPoA
PPPoA command reference
iMG/RG Software Reference Manual (ADSL Port)
8-148
8.8.1.1.44 PPPOA SHOW TRANSPORT
Syntax
PPPOA SHOW TRANSPORT {<name>|<number>}
Description
This command displays the following information about an existing PPPoA transport:
•
Description
•
Summary - the connection state
•
Server - dialin status
•
Headers - the data format that the transport can accept or receive
•
SVC status (true or false)
•
Local IP address
•
Subnet mask
•
Remote IP address
•
Remote DNS
•
Give DNS to Client status
•
Give DNS to Relay status
•
Create Route status
•
Specific Route status
•
Route Mask
•
Dialout Username
•
Dialout Password
•
Dialout Authentication method
•
Dialin Authentication method
•
LCP Max Configure
•
LCP Max Failure
•
LCP Echo Every
•
ATM address (for SVC transports only)
•
Auto-connect status
•
Idletime status
•
ATM port (for PVC transports only)
•
Rx VPI (for PVC transports only)
Page 919 / 998
PPPoA command reference
PPPoA
8-149
iMG/RG Software Reference Manual (ADSL Port)
•
Rx VCI (for PVC transports only)
•
Quality of Service
(QoS) class (for PVC transports only)
•
Burst tolerance (for PVC transports only)
•
Sustainable Cell Rate
(SCR) (for PVC transports only)
•
Maximum Burst Size
(MBS) (for PVC transports only)
•
Maximum Cell Rate
(MCR) (for PVC transports only)
•
Packet Priority Levels
setting
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
There are two examples given below. Example one is of an SVC transport. Example two
is of a PVC transport.
Example 1 - SVC
--> pppoa show transport pppoa1
PPP Transport: pppoa1
Description : pppoa1
Summary : disabled
Server : true
Headers: learn
SVC: true
Local IP : 192.168.100.1
Subnet Mask : 255.255.255.0
Remote IP : 192.168.100.2
Remote DNS : N/A
Give DNSto Client : true
Give DNSto Relay : true
Create Route : true
Specific Route : false
Route Mask : 255.0.0.0
Dialout Username :
Dialout Password :
Option
Description
Default Value
name
An existing PPPoA transport. To display transport names,
use the
PPPOA LIST TRANSPORTS
command.
N/A
number
An existing PPPoA transport. To display transport num-
bers, use the
PPPOA LIST TRANSPORTS
com-
mand.
N/A
Page 920 / 998
PPPoA
PPPoA command reference
iMG/RG Software Reference Manual (ADSL Port)
8-150
Dialout Auth : none
Dialin Auth : none
Lcp Max Configure : 10
Lcp Max Failure : 5
Lcp Max Terminate : 2
Lcp Echo Every : 10
Auto Connect : false
Idle Timeout : 0
ATM address:
47.00.83.10.a2.b1.00.00.00.00.00.00.00.00.20.2b.01.00.07.00
Example 2 - PVC
--> pppoa show transport pppoa2
PPP Transport: pppoa2
Summary : enabled, down
Server : true
Headers: learn
SVC: false
Local IP : 192.168.100.1
Subnet Mask : 255.255.255.0
Remote IP : 192.168.100.2
Remote DNS : N/A
Give DNSto Client : true
Give DNSto Relay : true
Create Route : true
Specific Route : false
Route Mask : 255.0.0.0
Dialout Username :
Dialout Password :
Dialout Auth : none
Dialin Auth : none
Lcp Max Configure : 10
Lcp Max Failure : 5
Lcp Max Terminate : 2
Lcp Echo Every : 10
Auto Connect : false
Idle Timeout : 0
Port : a1
Rx Vpi : N/A
Rx Vci : 100
Class : UBR
Burst Tolerance : N/A
Sustainable Cell Rate : N/A
MBS : N/A

Rate

4 / 5 based on 3 votes.

Popular Allied-Telesis Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top