1. Home
    2. /
  2. Manuals
    3. /
  3. Allied-Telesis
    4. /
  4. AT-iMG624A
    5. /
  5. 186
Page 926 / 998 Scroll up to view Page 921 - 925
RFC1483
RFC1483 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-156
8.9.1.1.7 RFC1483 SET TRANSPORT MCR
Syntax
RFC1483 SET TRANSPORT {<name>|<number>} MCR <minimum cell
rate>
Description
This command sets the
Minimum Cell Rate
(MCR) for an existing RFC1483 transport.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> rfc1483 set transport my1483 mcr 0
See also
RFC1483 SET TRANSPORT PCR
8.9.1.1.8 RFC1483 SET TRANSPORT MODE
Syntax
RFC1483 SET TRANSPORT {<name>|<number>} MODE {LLC|VCMUX}
Description
This command sets the mode of encapsulation that an existing RFC1483 transport uses.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Option
Description
Default Value
name
An existing RFC1483 transport. To display transport
names, use the
RFC1483 LIST TRANSPORTS
command.
N/A
number
An existing RFC1483 transport. To display transport
numbers, use the
RFC1483 LIST TRANSPORTS
command.
N/A
minimum cell
rate
Determines the minimum rate at which ATM cells can
be transported into the ATM network.
0
Option
Description
Default Value
name
An existing RFC1483 transport. To display transport
names, use the
RFC1483 LIST TRANSPORTS
command.
N/A
number
An existing RFC1483 transport. To display transport num-
bers, use the
RFC1483 LIST TRANSPORTS
com-
mand.
N/A
Page 927 / 998
RFC1483 command reference
RFC1483
8-157
iMG/RG Software Reference Manual (ADSL Port)
Example
--> rfc1483 set transport my1483 mode vcmux
See also
RFC1483 LIST TRANSPORTS
8.9.1.1.9 RFC1483 SET TRANSPORT PCR
Syntax
RFC1483 SET TRANSPORT {<name>|<number>} PCR <peak cell rate>
Description
This command sets the
Peak Cell Rate
(PCR) for an existing RFC1483 transport.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> rfc1483 set transport my1483 pcr 50000
See also
RFC1483 SET TRANSPORT MCR
RFC1483 LIST TRANSPORTS
8.9.1.1.10 RFC1483 SET TRANSPORT PORT
Syntax
RFC1483 SET TRANSPORT {<name>|<number>} PORT <atm-port>
llc
Logical Link Control
encapsulation method.
LLC
vcmux
VC Multiplexing encapsulation method.
Option
Description
Default Value
name
An existing RFC1483 transport. To display transport
names, use the
RFC1483 LIST TRANSPORTS
command.
N/A
number
An existing RFC1483 transport. To display transport num-
bers, use the
RFC1483 LIST TRANSPORTS
com-
mand.
N/A
peak cell rate
Determines the maximum rate at which ATM cells can be
transported into the ATM network. The PCR can be any
value from 0 up to the maximum PortSpeed parameter set
when the port was created (
PORT
a1
SET
)
N/A means “0”
Option
Description
Default Value
Page 928 / 998
RFC1483
RFC1483 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-158
Description
This command sets the port that an existing RFC1483 transport uses to transport
RFC1483 data over ATM. ATM ports are initialized in the initbun file in
FlashFS
, or
using the
BUN SET PORT CONSOLE
command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> rfc1483 set transport my1483 port a1
See also
RFC1483 LIST TRANSPORTS
PORT SET
8.9.1.1.11 RFC1483 SET TRANSPORT PRILEVELS
Syntax
RFC1483 SET TRANSPORT {<name>|<number>} PRILEVELS <pri-
levels>
Description
This command enables support for multiple packet priority levels on the same ATM VC.
Two prilevel values are supported:
•
There are no multiple priority levels enabled so the feature is disabled.
•
Packets with different priorities set (such as best effort and high priority traffic) are
prioritized on the same ATM vc.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option
Description
Default Value
name
An existing RFC1483 transport. To display transport
names, use the
RFC1483 LIST TRANSPORTS
command.
N/A
number
An existing RFC1483 transport. To display transport num-
bers, use the
RFC1483 LIST TRANSPORTS
com-
mand.
N/A
atm-port
The system port that is used to transport ATM data. The
port/VPI/VCI combination must be unique for each trans-
port.
N/A
Page 929 / 998
RFC1483 command reference
RFC1483
8-159
iMG/RG Software Reference Manual (ADSL Port)
Example
--> rfc1483 set transport myrfc prilevels 2
See also
RFC1483 SHOW TRANSPORT
8.9.1.1.12 RFC1483
SET TRANSPORT QOSCLASS
Syntax
RFC1483 set transport {<name>|<number>} QOSCLASS
{UBR|CBR|VBR|VBRRT|ABR|QFC}
Description
This command sets the
Quality of Service
(QoS) class for the transport.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option
Description
Default Value
name
An existing RFC1483 transport. To display transport names,
use the
RFC1483 LIST TRANSPORTS
command.
N/A
number
An existing RFC1483 transport. To display transport num-
bers, use the
RFC1483 LIST TRANSPORTS
com-
mand.
N/A
prilevels
The number of priority levels available on an ATM transport.
1
Option
Description
Default Value
name
An existing RFC1483 transport. To display transport names,
use the
RFC1483 LIST TRANSPORTS
command.
N/A
number
An existing RFC1483 transport. To display transport numbers,
use the
RFC1483 LIST TRANSPORTS
command.
N/A
ubr
Unspecified Bit Rate
; non-constant and unpredictable data
transport rate. PCR (
Peak Cell Rate
) is the average and max-
imum speed of transmission.
UBR
ubr+
Unspecified Bit Rate
plus; is a special ATM service class
developed by Cisco Systems.
cbr
Constant Bit Rate
; constant demand and predictable data
transport rate. PCR is the average and maximum speed of
transmission.
Page 930 / 998
RFC1483
RFC1483 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-160
Example
--> rfc1483 set transport my1483 abr
See also
RFC1483 SHOW TRANSPORT
RFC1483 SET TRANSPORT BT
RFC1483 SET TRANSPORT MBS
RFC1483 SET TRANSPORT PCR
RFC1483 SET TRANSPORT SCR
8.9.1.1.13 RFC1483 SET TRANSPORT RXVCI
Syntax
RFC1483 SET TRANSPORT {<name>|<number>} RXVCI <vci>
Description
This command sets the receive
Virtual Circuit Identifier
channel. If you later set the VCI
using the
RFC1483 SET TRANSPORT VCI
command, the RX VCI setting will be
overridden.
The port/VCI/VPI combination must be unique for each transport.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
vbr
Variable Bit Rate
; non-constant but predictable data trans-
port rate that uses
Non-Real-Time
(NRT). You can specify
the PCR, SCR, BT and MBS for VBR traffic.
vbrrt
Variable Bit Rate Real-Time
; non-constant but predictable
data transport rate that uses
Real-Time
(RT). You can specify
the PCR, SCR, BT and MBS for VBRRT traffic.
abr
Available Bit Rate
; non-constant and unpredictable data
transport rate that provides ATM-layer feedback and flow con-
trol.
qfc
QFC: ATM flow control protocol that supports ABR.
Option
Description
Default Value
name
An existing RFC1483 transport. To display transport
names, use the
RFC1483 LIST TRANSPORTS
command.
N/A
number
An existing RFC1483 transport. To display transport num-
bers, use the
RFC1483 LIST TRANSPORTS
com-
mand.
N/A
Option
Description
Default Value

Rate

4 / 5 based on 3 votes.

Popular Allied-Telesis Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top