Page 171 / 211 Scroll up to view Page 166 - 170
FiOS Router User Manual
171
© 2010 Verizon. All Rights Reserved.
Complete the following fields:
3.
Start IP Address Range, End IP Address Range
- determines the number
of hosts connected to the network in this subnet. “Start” specifies the first IP
address assigned in this subnet and “End” specifies the last IP address in
the range.
Subnet Mask
- used to determine to which subnet an IP address belongs. An
example of a subnet mask value is 255.255.0.0.
WINS
Server
- The WINS (Windows Internet Naming Service) server
determines the IP address associated with a network device.
Lease Time
- each device will be assigned an IP address by the DHCP server
for a limited time (“Lease Time”) when it connects to the network. When the
lease expires, the server will determine if the computer has disconnected
from the network. If it has, the server may reassign this IP address to a newly-
connected computer. This feature ensures that IP addresses not in use will
become available for other computers on the network.
Provide host name if not specified by client
- when activated, the FiOS
Router assigns the client a default name if the DHCP client has no host name.
Click
4.
Apply
to save the changes.
DHCP Connections
To view a list of computers currently recognized by the DHCP server, click
Connection List
at the bottom of the IP Address Distribution screen. The “DHCP
Connections” screen appears.
Page 172 / 211
Configuring Advanced Settings
8.8 Routing Settings
8
172
© 2010 Verizon. All Rights Reserved.
To define a new connection with a fixed IP address:
Click
1.
New Static Connection
in the DHCP Connections screen. The “DHCP
Connection Settings” screen appears.
Enter a host name for this connection.
2.
Enter the fixed IP address to assign to the computer.
3.
Enter the MAC address of the computer’s network card.
4.
Click the
5.
Apply
to save changes.
Note:
A device’s fixed IP address is actually assigned to the specific network
card’s MAC address installed on the network computer. If this network card is
replaced, the device’s entry in the DHCP Connections list must be updated with
the new network card’s MAC address.
To remove a host from the table, click the appropriate “Delete” icon in the
Action column.
Page 173 / 211
173
© 2010 Verizon. All Rights Reserved.
9
Monitoring
the FiOS
Router
9.0
Introduction
9.1
Router Status
9.2
Advanced Status
Page 174 / 211
174
© 2010 Verizon. All Rights Reserved.
The FiOS Router’s System Monitoring
screens display important system
information, including basic router
settings, system log, key network device
parameters, and network traffic statistics.
Page 175 / 211
FiOS Router User Manual
175
© 2010 Verizon. All Rights Reserved.
9.1
Router Status
Click
System Monitoring
at the top of the Home screen to display the “Router
Status” screen, which displays the FiOS Router’s basic settings.
9.2
Advanced Status
After selecting
Advanced Status
and clicking
Yes
in the Warning screen,
the monitoring options appear:
System Logging
,
Full Status/System wide
Monitoring of Connections
,
Traffic
Monitoring
,
Broadband
Monitoring,
and
IGMP Proxy
.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top