19216811.liveManagement and Diagnostic Console
121
The following table shows the possible nodes that can display on the Link Manager States page.
The nodes that display are dependent on the 2Wire gateway. For example, 2Wire gateways that are not
connected to the Internet via ADSL will not display ADSL information.
Node
Description
root0
Root for configuration tree.
global0
Branch for all global configuration modules.
device0
Maintains the status and configuration for devices on the 2Wire gateway.
rnat0
Maintains the application mappings and pinholes for nodes on the 2Wire gateway.
route0
Maintains all static routes on the 2Wire gateway.
fw0
Maintains all firewall rules on the 2Wire gateway.
cms0
Monitors CMS connectivity and activity with the 2Wire gateway.
home0
Branch for the home network modules.
vlan0
Home network virtual LAN configuration module.
ipnet1
Home network IP configuration module.
vlanmon0
Home network virtual LAN monitor for activity.
ipbridge0
Home network IP bridge/DMZ configuration module.
ipnet2
Home network public IP network configuration module.
vlan3
Home network voice virtual LAN module.
bband0
Branch for the primary broadband network.
vlan1
Primary broadband virtual LAN configuration module.
dhcp0
Primary broadband DHCP client module.
ipnet0
Primary broadband IP configuration module.
dnstest0
Primary broadband DNS access test module.
vlan2
Primary broadband PPP bridge virtual LAN.
dsl0
DSL device control module.
apvc0
Primary broadband ATM and auto PVC search module.
pppoe0
Primary broadband PPPoE configuration module.
pppoa0
Primary broadband PPPoA configuration module.
rtatm0
Primary broadband routed ATM configuration module.