Enable Telnet Server: Enables Telnet access to the AirOS Device.

Server Port: Telnet service TCP/IP port setting.

System

The System Page contains Administrative options. This page enables administrator to

customize, reboot the device, set it to factory defaults, upload a new firmware, backup

or update the configuration and configure administrator’s credentials.

Administrative Management

In this section you can modify the administrator password to protect your device from

unauthorized configuration. The default administrator’s password should be changed

on the very first setup:

Administrator Username: displays name of the system user. The username is not

configurable parameter, so it cannot be changed.

Current Password: enter a current password value. Default administrator login

credentials:

User Name: ubnt

Password: ubnt

New Password: enter a new password value used for administrator authentication.

Verify Password: re-enter the new password to verify its accuracy.

Click Change button to save the changes.

Router Protocol Host Name

Host Name is the system wide device identifier. It is reported by SNMP Agent to

authorized management stations.

Host Name: specify the system identity. Click Change button to save the changes.

Logo Customization

Use this section to enable and upload your custom logo on the device user interface.

The logo must conform to these limitations:

•

The size limit of the logo is 50Kb.

•

The maximum height of logo should be 70 pixels.

•

Only .gif format images are accepted.

To upload new logo, enable logo customization and specify the location of logo file:

Enable Custom Logo: control will enable logo customization. Deselecting this option the

custom logo will be removed and the default Ubiquiti logo will be restored. Logo Target

URL: specify the target URL of custom logo. Target URL is opened when clicking on

custom logo. Logo File: click Browse… button to navigate to and select the logo file or

specify the full path and click the Upload button.

UI Language Selection

Use this section to change the language setting ogf the web management interface.

Firmware

Use this section to find out current software version and update the device with the

new firmware. The device firmware update is compatible with all configuration

settings. When the device is updated with a newer version or the same version

firmware builds, system configuration will be preserved.

Firmware version: displays version of the current firmware. Upgrade…: click to load the

device firmware upgrade window. After the Upgrade… button is clicked the new

Firmware Upload pop-up window will be displayed:

Current Firmware: displays version of the current firmware. Firmware File: click the

Browse… button to specify the new firmware image location or specify the full path

and click the Upload button. Close this window – cancel the upload process. After the

new firmware image is uploaded into the system, use Upgrade button to upgrade a

device:

Image:System5.jpg

Do not switch off, do not reboot and do not disconnect the device from the

power supply during the firmware upgrade process as this can damage the

device!

After clicking the Upgrade button the upgrade process starts immediately:

Close this window – close firmware upgrade window. This action will not cancel the

firmware upgrade process.

Configuration Management

PowerStation2/LiteStation2/LiteStation5 configuration is stored in plain text file. Use

the Configuration Management section controls to manage (backup, restore/update)

system configuration file:

Image:System7.jpg

Backup Configuration: click Download… button to download the

current system configuration file. Upload Configuration: click Browse… button to

navigate to and select the new configuration file or specify the full path and click the

Upload button.

Use only configuration backups of the same type device - configuration backed up from

PowerStation2 suits only PowerStation2, but not LiteStation2 or LiteStation5! Behavior

may be unpredictable when mixing configurations from different type devices.

Device Maintenance

Use this section to reboot device or reset all the system parameters to factory default

values:

Image:System8.jpg

Reboot: click to hard-reboot the device in the current

configuration. Any non-applied changes will be lost. Reset to Defaults: click to reset the

device to factory defaults.

Retrieved from "

"

This page was last modified 11:25, 25 July 2008. This page has been accessed 43,722

times.

•

Privacy policy

•

About Ubiquiti Wiki

•

Disclaimers

•

Powered by MediaWiki