Page 41 / 944
Scroll up to view Page 36 - 40
Chapter 2 Features and Applications
ZyWALL USG 50 User’s Guide
41
2.2.2.1
Full Tunnel Mode
In full tunnel mode, a virtual connection is created for remote users with private
IP addresses in the same subnet as the local network. This allows them to access
network resources in the same way as if they were part of the internal network.
Figure 6
Network Access Mode: Full Tunnel Mode
Web Mail
File Share
Web-based Application
https;//
Application
Server
Non-Web
LAN (192.168.1.X)
192.168.1.100
Page 42 / 944
Chapter 2 Features and Applications
ZyWALL USG 50 User’s Guide
42
2.2.3
User-Aware Access Control
Set up security policies that restrict access to sensitive information and shared
resources based on the user who is trying to access it.
Figure 7
Applications: User-Aware Access Control
2.2.4
Multiple WAN Interfaces
Set up multiple connections to the Internet on the same port, or set up multiple
connections on different ports. In either case, you can balance the loads between
them.
Figure 8
Applications: Multiple WAN Interfaces
Page 43 / 944
ZyWALL USG 50 User’s Guide
43
C
HAPTER
3
Web Configurator
The ZyWALL Web Configurator allows easy ZyWALL setup and management using
an Internet browser.
3.1
Web Configurator Requirements
In order to use the Web Configurator, you must
•
Use Internet Explorer 7 or later, or Firefox 1.5 or later
•
Allow pop-up windows (blocked by default in Windows XP Service Pack 2)
•
Enable JavaScripts (enabled by default)
•
Enable Java permissions (enabled by default)
•
Enable cookies
The recommended screen resolution is 1024 x 768 pixels.
3.2
Web Configurator Access
1
Make sure your ZyWALL hardware is properly connected. See the Quick Start
Guide.
Page 44 / 944
Chapter 3 Web Configurator
ZyWALL USG 50 User’s Guide
44
2
Open your web browser, and go to
. By default, the ZyWALL
automatically routes this request to its HTTPS server, and it is recommended to
keep this setting. The
Login
screen appears.
Figure 9
Login Screen
3
Type the user name (default: “admin”) and password (default: “1234”).
If your account is configured to use an ASAS authentication server, use the OTP
(One-Time Password) token to generate a number. Enter it in the
One-Time
Password
field. The number is only good for one login. You must use the token to
generate a new number the next time you log in.
4
Click
Login
. If you logged in using the default user name and password, the
Update Admin Info
screen (
Figure 10 on page 44
) appears. Otherwise, the
dashboard (
Figure 11 on page 45
) appears.
Figure 10
Update Admin Info Screen
Page 45 / 944
Chapter 3 Web Configurator
ZyWALL USG 50 User’s Guide
45
5
The screen above appears every time you log in using the default user name and
default password. If you change the password for the default user account, this
screen does not appear anymore.
Follow the directions in this screen. If you change the default password, the
Login
screen (
Figure 9 on page 44
) appears after you click
Apply
. If you click
Ignore
,
the
Installation Setup Wizard
opens if the ZyWALL is using its default
configuration (see
Chapter 4 on page 59
); otherwise the dashboard appears as
shown next.
Figure 11
Dashboard
3.3
Web Configurator Screens Overview
The Web Configurator screen is divided into these parts (as illustrated in
Figure 11
on page 45
):
•
A
- title bar
•
B
- navigation panel
•
C
- main window
3.3.1
Title Bar
The title bar provides some icons in the upper right corner.
Figure 12
Title Bar
A
C
B
19216811.live