1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. ZyWALL-USG50
    5. /
  5. 12
Page 56 / 944 Scroll up to view Page 51 - 55
Chapter 3 Web Configurator
ZyWALL USG 50 User’s Guide
56
3
Select a column heading cell’s right border and drag to re-size the column.
Figure 21
Resizing a Table Column
4
Select a column heading and drag and drop it to change the column order. A green
check mark displays next to the column’s title when you drag the column to a valid
new location.
Figure 22
Changing the Column Order
5
Use the icons and fields at the bottom of the table to navigate to different pages of
entries and control how many entries display at a time.
Figure 23
Navigating Pages of Table Entries
Page 57 / 944
Chapter 3 Web Configurator
ZyWALL USG 50 User’s Guide
57
3.3.4.2
Working with Table Entries
The tables have icons for working with table entries. A sample is shown next. You
can often use the [Shift] or [Ctrl] key to select multiple entries to remove,
activate, or deactivate.
Figure 24
Common Table Icons
Here are descriptions for the most common table icons.
3.3.4.3
Working with Lists
When a list of available entries displays next to a list of selected entries, you can
often just double-click an entry to move it from one list to the other. In some lists
Table 10
Common Table Icons
LABEL
DESCRIPTION
Add
Click this to create a new entry. For features where the entry’s
position in the numbered list is important (features where the
ZyWALL applies the table’s entries in order like the firewall for
example), you can select an entry and click
Add
to create a new
entry after the selected entry.
Edit
Double-click an entry or select it and click
Edit
to open a screen
where you can modify the entry’s settings. In some tables you can
just click a table entry and edit it directly in the table. For those types
of tables small red triangles display for table entries with changes
that you have not yet applied.
Remove
To remove an entry, select it and click
Remove
. The ZyWALL
confirms you want to remove it before doing so.
Activate
To turn on an entry, select it and click
Activate
.
Inactivate
To turn off an entry, select it and click
Inactivate
.
Connect
To connect an entry, select it and click
Connect
.
Disconnect
To disconnect an entry, select it and click
Disconnect
.
Object References
Select an entry and click
Object References
to open a screen that
shows which settings use the entry. See
Section 11.3.2 on page 230
for an example.
Move
To change an entry’s position in a numbered list, select it and click
Move
to display a field to type a number for where you want to put
that entry and press [ENTER] to move the entry to the number that
you typed. For example, if you type 6, the entry you are moving
becomes number 6 and the previous entry 6 (if there is one) gets
pushed up (or down) one.
Page 58 / 944
Chapter 3 Web Configurator
ZyWALL USG 50 User’s Guide
58
you can also use the [Shift] or [Ctrl] key to select multiple entries, and then use
the arrow button to move them to the other list.
Figure 25
Working with Lists
Page 59 / 944
ZyWALL USG 50 User’s Guide
59
C
HAPTER
4
Installation Setup Wizard
4.1
Installation Setup Wizard Screens
If you log into the Web Configurator when the ZyWALL is using its default
configuration, the first
Installation Setup Wizard
screen displays. This wizard
helps you configure Internet connection settings and activate subscription
services. This chapter provides information on configuring the Web Configurator's
installation setup wizard. See the feature-specific chapters in this User’s Guide for
background information.
Figure 26
Installation Setup Wizard
•
Click the double arrow in the upper right corner to display or hide the help.
• Click
Go to Dashboard
to skip the installation setup wizard or click
Next
to
start configuring for Internet access.
4.1.1
Internet Access Setup - WAN Interface
Use this screen to set how many WAN interfaces to configure and the first WAN
interface’s type of encapsulation and method of IP address assignment.
Page 60 / 944
Chapter 4 Installation Setup Wizard
ZyWALL USG 50 User’s Guide
60
The screens vary depending on the encapsulation type. Refer to information
provided by your ISP to know what to enter in each field. Leave a field blank if you
don’t have that information.
Note: Enter the Internet access information exactly as your ISP gave it to you.
Figure 27
Internet Access: Step 1
•
I have two ISPs
: Select this option to configure two Internet connections.
Leave it cleared to configure just one. This option appears when you are
configuring the first WAN interface.
•
Encapsulation
: Choose the
Ethernet
option when the WAN port is used as a
regular Ethernet. Otherwise, choose
PPPoE
or
PPTP
for a dial-up connection
according to the information from your ISP.
•
WAN Interface
: This is the interface you are configuring for Internet access.
•
Zone
: This is the security zone to which this interface and Internet connection
belong.
•
IP Address Assignment
: Select
Auto
if your ISP did not assign you a fixed IP
address.
Select
Static
if the ISP assigned a fixed IP address.
4.1.2
Internet Access: Ethernet
This screen is read-only if you set the previous screen’s
IP Address Assignment
field to
Auto
. Use this screen to configure your IP address settings.

Rate

4.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top