1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. ZyWALL-USG50
    5. /
  5. 15
Page 71 / 944 Scroll up to view Page 66 - 70
Chapter 5 Quick Setup
ZyWALL USG 50 User’s Guide
71
Otherwise, choose
PPPoE
or
PPTP
for a dial-up connection according to the
information from your ISP.
Figure 37
WAN Interface Setup: Step 2
The screens vary depending on what encapsulation type you use. Refer to
information provided by your ISP to know what to enter in each field. Leave a field
blank if you don’t have that information.
Note: Enter the Internet access information exactly as your ISP gave it to you.
5.2.3
Configure WAN Settings
Use this screen to select whether the interface should use a fixed or dynamic IP
address.
Figure 38
WAN Interface Setup: Step 2
•
WAN Interface
: This is the interface you are configuring for Internet access.
•
Zone
: This is the security zone to which this interface and Internet connection
belong.
Page 72 / 944
Chapter 5 Quick Setup
ZyWALL USG 50 User’s Guide
72
•
IP Address Assignment
: Select
Auto
If your ISP did not assign you a fixed IP
address.
Select
Static
If the ISP assigned a fixed IP address.
5.2.4
WAN and ISP Connection Settings
Use this screen to configure the ISP and WAN interface settings. This screen is
read-only if you set the
IP Address Assignment
to
Static
.
Note: Enter the Internet access information exactly as your ISP gave it to you.
Figure 39
WAN and ISP Connection Settings: (PPTP Shown)
The following table describes the labels in this screen.
Table 11
WAN and ISP Connection Settings
LABEL
DESCRIPTION
ISP Parameter
This section appears if the interface uses a PPPoE or PPTP Internet
connection.
Encapsulation
This displays the type of Internet connection you are configuring.
Page 73 / 944
Chapter 5 Quick Setup
ZyWALL USG 50 User’s Guide
73
Authentication
Type
Use the drop-down list box to select an authentication protocol for
outgoing calls. Options are:
CHAP/PAP
- Your ZyWALL accepts either CHAP or PAP when
requested by this remote node.
CHAP
- Your ZyWALL accepts CHAP only.
PAP
- Your ZyWALL accepts PAP only.
MSCHAP
- Your ZyWALL accepts MSCHAP only.
MSCHAP-V2
- Your ZyWALL accepts MSCHAP-V2 only.
User Name
Type the user name given to you by your ISP. You can use
alphanumeric and -_
@$./
characters, and it can be up to 31
characters long.
Password
Type the password associated with the user name above. Use up to 64
ASCII characters except the [] and ?. This field can be blank.
Retype to
Confirm
Type your password again for confirmation.
Nailed-Up
Select
Nailed-Up
if you do not want the connection to time out.
Idle Timeout
Type the time in seconds that elapses before the router automatically
disconnects from the PPPoE server. 0 means no timeout.
PPTP
Configuration
This section only appears if the interface uses a PPPoE or PPTP
Internet connection.
Base Interface
This displays the identity of the Ethernet interface you configure to
connect with a modem or router.
Base IP
Address
Type the (static) IP address assigned to you by your ISP.
IP Subnet
Mask
Type the subnet mask assigned to you by your ISP (if given).
Server IP
Type the IP address of the PPTP server.
Connection ID
Enter the connection ID or connection name in this field. It must
follow the "c:id" and "n:name" format. For example, C:12 or N:My
ISP.
This field is optional and depends on the requirements of your DSL
modem.
You can use alphanumeric and -_
:
characters, and it can be up to 31
characters long.
WAN Interface
Setup
WAN Interface
This displays the identity of the interface you configure to connect
with your ISP.
Zone
This field displays to which security zone this interface and Internet
connection will belong.
IP Address
This field is read-only when the WAN interface uses a dynamic IP
address. If your WAN interface uses a static IP address, enter it in this
field.
Table 11
WAN and ISP Connection Settings (continued)
LABEL
DESCRIPTION
Page 74 / 944
Chapter 5 Quick Setup
ZyWALL USG 50 User’s Guide
74
5.2.5
Quick Setup Interface Wizard: Summary
This screen displays the WAN interface’s settings.
Figure 40
Interface Wizard: Summary WAN (PPTP Shown)
The following table describes the labels in this screen.
First DNS
Server
Second DNS
Server
These fields only display for an interface with a static IP address.
Enter the DNS server IP address(es) in the field(s) to the right.
Leave the field as
0.0.0.0
if you do not want to configure DNS
servers. If you do not configure a DNS server, you must know the IP
address of a machine in order to access it.
DNS (Domain Name System) is for mapping a domain name to its
corresponding IP address and vice versa. The DNS server is extremely
important because without it, you must know the IP address of a
computer before you can access it. The ZyWALL uses a system DNS
server (in the order you specify here) to resolve domain names for
VPN, DDNS and the time server.
Back
Click
Back
to return to the previous screen.
Next
Click
Next
to continue.
Table 11
WAN and ISP Connection Settings (continued)
LABEL
DESCRIPTION
Table 12
Interface Wizard: Summary WAN
LABEL
DESCRIPTION
Encapsulation
This displays what encapsulation this interface uses to connect to the
Internet.
Service Name
This field is read-only and only appears for a PPPoE interface. It displays
the PPPoE service name specified in the ISP account.
Server IP
This field only appears for a PPTP interface. It displays the IP address of
the PPTP server.
Page 75 / 944
Chapter 5 Quick Setup
ZyWALL USG 50 User’s Guide
75
5.3
VPN Quick Setup
Click
VPN Setup
in the main
Quick Setup
screen to open the
VPN Setup
Wizard Welcome
screen. The VPN wizard creates corresponding VPN connection
and VPN gateway settings and address objects that you can use later in
configuring more VPN connections or other features. Click
Next
.
Figure 41
VPN Quick Setup Wizard
User Name
This is the user name given to you by your ISP.
Nailed-Up
If
No
displays the connection will not time out.
Yes
means the ZyWALL
uses the idle timeout.
Idle Timeout
This is how many seconds the connection can be idle before the router
automatically disconnects from the PPPoE server. 0 means no timeout.
Connection ID
If you specified a connection ID, it displays here.
WAN Interface
This identifies the interface you configure to connect with your ISP.
Zone
This field displays to which security zone this interface and Internet
connection will belong.
IP Address
Assignment
This field displays whether the WAN IP address is static or dynamic
(
Auto
).
First DNS
Server
Second DNS
Server
If the
IP Address Assignment
is
Static
, these fields display the DNS
server IP address(es).
Close
Click
Close
to exit the wizard.
Table 12
Interface Wizard: Summary WAN
LABEL
DESCRIPTION

Rate

4.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top