1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. VMG8324-B10A
    5. /
  5. 50
Page 246 / 404 Scroll up to view Page 241 - 245
Chapter 21 Voice
VMG8324-B10A / VMG8324-B30A Series User’s Guide
246
Ignore Direct IP
Select
Enable
to have the connected CPE devices accept SIP requests only from the SIP
proxy/register server specified above. SIP requests sent from other IP addresses will be
ignored.
FAX Option
This field controls how the Device handles fax messages.
G711 Fax
Passthrough
Select this if the Device should use G.711 to send fax messages. You have to also select
which operating codec (
G.711Mulaw
or
G.711Alaw
) to use for encoding/decoding FAX
data. The peer devices must use the same settings.
T38 Fax Relay
Select this if the Device should send fax messages as UDP or TCP/IP packets through IP
networks. This provides better quality, but it may have inter-operability problems. The peer
devices must also use T.38.
QoS Tag
SIP DSCP Mark
Setting
Enter the DSCP (DiffServ Code Point) number for SIP message transmissions. The Device
creates Class of Service (CoS) priority tags with this number to SIP traffic that it transmits.
RTP DSCP Mark
Setting
Enter the DSCP (DiffServ Code Point) number for RTP voice transmissions. The Device
creates Class of Service (CoS) priority tags with this number to RTP traffic that it transmits.
Timer Setting
Expiration
Duration
Enter the number of seconds your SIP account is registered with the SIP register server
before it is deleted. The Device automatically tries to re-register your SIP account when
one-half of this time has passed. (The SIP register server might have a different expiration.)
Register Re-
send timer
Enter the number of seconds the Device waits before it tries again to register the SIP
account, if the first try failed or if there is no response.
Session Expires
Enter the number of seconds the Device lets a SIP session remain idle (without traffic)
before it automatically disconnects the session.
Min-SE
Enter the minimum number of seconds the Device lets a SIP session remain idle (without
traffic) before it automatically disconnects the session. When two SIP devices start a SIP
session, they must agree on an expiration time for idle sessions. This field is the shortest
expiration time that the Device accepts.
Phone Key
Config
Enter the key combinations for certain functions of the SIP phone.
Call Return
Enter the key combinations that you can enter to place a call to the last number that called
you.
One Shot Caller
Display Call
Enter the key combinations that you can enter to activate caller ID for the next call only.
One Shot Caller
Hidden Call
Enter the key combinations that you can enter to deactivate caller ID for the next call only.
Call Waiting
Enable
Enter the key combinations that you can enter to turn on the call waiting function.
Call Waiting
Disable
Enter the key combinations that you can enter to turn off the call waiting function.
IVR
Enter the key combinations that you can enter to record custom caller ringing tones (the
sound a caller hears before you pick up the phone) and on hold tones (the sound someone
hears when you put their call on hold). IVR stands for Interactive Voice Response.
Internal Call
Enter the key combinations that you can enter to call the phone(s) connected to the Device.
Call Transfer
Enter the key combinations that you can enter to transfer a call to another phone.
Unconditional
Call Forward
Enable
Enter the key combinations that you can enter to forward all incoming calls to the phone
number you specified in the
SIP > SIP Account
screen.
Unconditional
Call Forward
Disable
Enter the key combinations that you can enter to turn the unconditional call forward
function off.
Table 114
VoIP > SIP > SIP Service Provider > Add new provider/Edit (continued)
LABEL
DESCRIPTION
Page 247 / 404
Chapter 21 Voice
VMG8324-B10A / VMG8324-B30A Series User’s Guide
247
No Answer Call
Forward Enable
Enter the key combinations that you can enter to forward incoming calls to the phone
number you specified in the
SIP > SIP Account
screen if the calls are unanswered.
No Answer Call
Forward
Disable
Enter the key combinations that you can enter to turn the no answer call forward function
off.
Call Forward
When Busy
Enable
Enter the key combinations that you can enter to forward incoming calls to the phone
number you specified in the
SIP > SIP Account
screen if the phone port is busy.
Call Forward
When Busy
Disable
Enter the key combinations that you can enter to turn the busy forward function off.
One Shot Call
Waiting Enable
Enter the key combinations that you can enter to activate call waiting on the next calls.
One Shot Call
Waiting Disable
Enter the key combinations that you can enter to deactivate call waiting on the next call
only.
Do Not Disturb
Enable
Enter the key combinations that you can enter to set your phone not to ring when someone
calls you.
Do Not Disturb
Disable
Enter the key combinations that you can enter to turn this function off.
Call Completion
on Busy
Subscriber
(CCBS)
Deactivate
Enter the key combinations that you can enter to disable CCBS on a call.
Outgoing SIP
Enter the key combinations that you can enter to select the SIP account that you use to
make outgoing calls.
If you enter #12(by default)<SIP account index number>#<the phone number you want to
call>, #1201#12345678 for example, the Device uses the first SIP account to call
12345678.
Dial Plan
Dial Plan
Enable
Select this to activate the dial plan rules you specify in the text box provided. See
Section
21.4.2 on page 248
for how to set up a rule.
Dialing Interval Selection
Dialing Interval
Selection
Enter the number of seconds the Device should wait after you stop dialing numbers before it
makes the phone call. The value depends on how quickly you dial phone numbers.
If you select
Immediate Dial Enable
, you can press the pound key (#) to tell the Device
to make the phone call immediately, regardless of this setting.
Immediate Dial Enable
Immediate Dial
Enable
Select this if you want to use the pound key (#) to tell the Device to make the phone call
immediately, instead of waiting the number of seconds you selected in the
Dialing Interval
Selection
field.
If you select this, dial the phone number, and then press the pound key.
The Device makes the call immediately, instead of waiting. You can still wait, if you want.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
Table 114
VoIP > SIP > SIP Service Provider > Add new provider/Edit (continued)
LABEL
DESCRIPTION
Page 248 / 404
Chapter 21 Voice
VMG8324-B10A / VMG8324-B30A Series User’s Guide
248
21.4.2
Dial Plan Rules
A dial plan defines the dialing patterns, such as the length and range of the digits for a telephone
number. It also includes country codes, access codes, area codes, local numbers, long distance
numbers or international call prefixes. For example, the dial plan ([2-9]xxxxxx) does not allow a
local number which begins with 1 or 0.
Without a dial plan, users have to manually enter the whole callee’s number and wait for the
specified dialing interval to time out or press a terminator key (usually the pound key on the phone
keypad) before the Device makes the call.
The Device initializes a call when the dialed number matches any one of the rules in the dial plan.
Dial plan rules follow these conventions:
•
The collection of rules is in parentheses ().
•
Rules are separated by the | (bar) symbol.
•
“x” stands for a wildcard and can be any digit from 0 to 9.
•
A subset of keys is in a square bracket []. Ranges are allowed.
For example, [359] means a number matching this rule can be 3, 5 or 9. [26-8*] means a
number matching this rule can be 2, 6, 7, 8 or *.
•
The dot “.” appended to a digit allows the digit to be ignored or repeated multiple times. Any digit
(0~9, *, #) after the dot will be ignored.
For example, (01.) means a number matching this rule can be 0, 01, 0111, 01111, and so on.
•
<dialed-number:translated-number> indicates the number after the colon replaces the number
before the colon in an angle bracket <>. For example,
(<:1212> xxxxxxx) means the Device automatically prefixes the translated-number “1212” to
the number you dialed before making the call. This can be used for local calls in the US.
(<9:> xxx xxxxxxx) means the Device automatically removes the specified prefix “9” from the
number you dialed before making the call. This is always used for making outside calls from an
office.
(xx<123:456>xxxx) means the Device automatically translates “123” to “456” in the number
you dialed before making the call.
•
Calls with a number followed by the exclamation mark “!” will be dropped.
•
Calls with a number followed by the termination character “@” will be made immediately. Any
digit (0~9, *, #) after the @ character will be ignored.
In this example dial plan (0 | [49]11 | 1 [2-9]xx xxxxxxx | 1 947 xxxxxxx !), you can dial “0” to call
the local operator, call 411 or 911, or make a long distance call with an area code starting from 2 to
9 in the US. The calls with the area code 947 will be dropped.
Page 249 / 404
Chapter 21 Voice
VMG8324-B10A / VMG8324-B30A Series User’s Guide
249
21.5
The Phone Screen
Use this screen to maintain settings that depend on which region of the world the Device is in. To
access this screen, click
VoIP > Phone
.
Figure 147
VoIP > Phone
Each field is described in the following table.
21.6
The Call Rule Screen
Use this screen to add, edit, or remove speed-dial numbers for outgoing calls. Speed dial provides
shortcuts for dialing frequently-used (VoIP) phone numbers. You also have to create speed-dial
entries if you want to call SIP numbers that contain letters. Once you have configured a speed dial
Table 115
VoIP > Phone
LABEL
DESCRIPTION
Region Settings
Select the place in which the Device is located.
Call Service Mode
Select the mode for supplementary phone services (call hold, call waiting, call transfer
and three-way conference calls) that your VoIP service provider supports.
Europe Type
- use supplementary phone services in European mode
USA Type
- use supplementary phone services American mode
You might have to subscribe to these services to use them. Contact your VoIP service
provider.
Apply
Click this to save your changes and to apply them to the Device.
Cancel
Click this to set every field in this screen to its last-saved value.
Page 250 / 404
Chapter 21 Voice
VMG8324-B10A / VMG8324-B30A Series User’s Guide
250
rule, you can use a shortcut (the speed dial number, #01 for example) on your phone's keypad to
call the phone number.
Figure 148
VoIP > Call Rule
Each field is described in the following table.
21.7
The Call History Summary Screen
The Device logs calls from or to your SIP numbers. This screen allows you to view the summary of
received, dialed and missed calls.
Click
VoIP > Call History > Call History Summary
. The following screen displays.
Figure 149
VoIP > Call History > Call History Summary
Table 116
VoIP > Call Rule
LABEL
DESCRIPTION
Clear all speed
dials
Click this to erase all the speed-dial entries on this screen.
Keys
This field displays the speed-dial number you should dial to use this entry.
Number
Enter the SIP number you want the Device to call when you dial the speed-dial number.
Description
Enter a name to identify the party you call when you dial the speed-dial number. You can
use up to 127 printable ASCII characters.
Apply
Click this to save your changes and to apply them to the Device.
Cancel
Click this to set every field in this screen to its last-saved value.

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top