Chapter 32 Logs Setting
VMG4380-B10A / VMG4325-B10A User’s Guide
270
The following table describes the fields in this screen.
32.2.1
Example E-mail Log
An "End of Log" message displays for each mail in which a complete log has been sent. The
following is an example of a log sent by e-mail.
•
You may edit the subject title.
•
The date format here is Day-Month-Year.
•
The date format here is Month-Day-Year. The time format is Hour-Minute-Second.
Table 108
Maintenance > Logs Setting
LABEL
DESCRIPTION
Syslog Setting
Syslog Logging
The Device sends a log to an external syslog server. Select
Enable
to enable syslog logging.
Mode
Select the syslog destination from the drop-down list box.
If you select
Remote
, the log(s) will be sent to a remote syslog server. If you select
Local
File
, the log(s) will be saved in a local file. If you want to send the log(s) to a remote syslog
server and save it in a local file, select
Local File and Remote
.
Syslog Server
Enter the server name or IP address of the syslog server that will log the selected categories
of logs.
UDP Port
Enter the port number used by the syslog server.
E-mail Log Settings
Mail Server
Enter the server name or the IP address of the mail server for the e-mail addresses
specified below. If this field is left blank, logs and alert messages will not be sent via E-mail.
System Log
Mail Subject
Type a title that you want to be in the subject line of the system log e-mail message that
the Device sends.
Security Log
Mail Subject
Type a title that you want to be in the subject line of the security log e-mail message that
the Device sends.
Send Log to
The Device sends logs to the e-mail address specified in this field. If this field is left blank,
the Device does not send logs via E-mail.
Send Alarm to
Alerts are real-time notifications that are sent as soon as an event, such as a DoS attack,
system error, or forbidden web access attempt occurs. Enter the E-mail address where the
alert messages will be sent. Alerts include system errors, attacks and attempted access to
blocked web sites. If this field is left blank, alert messages will not be sent via E-mail.
Alarm Interval
Specify how often the alarm should be updated.
Allowed
Capacity Before
Email
Set what percent of the Device’s log storage space can be filled before the Device sends a
log e-mail.
Clear log after
sending mail
Select this to delete all the logs after the Device sends an E-mail of the logs.
Active Log and Alert
System Log
Select the categories of system logs that you want to record.
Security Log
Select the categories of security logs that you want to record.
Send
immediate alert
Select log categories for which you want the Device to send E-mail alerts immediately.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
19216811.live