Page 41 / 331
Scroll up to view Page 36 - 40
Chapter 4 Tutorials
VMG1312-B Series User’s Guide
41
Example WPS Process: PIN Method
4.3.3
Without WPS
Use the wireless adapter’s utility installed on the notebook to search for the “Example” SSID. Then
enter the “DoNotStealMyWirelessNetwork” pre-shared key to establish an wireless Internet
connection.
Note: The Device supports IEEE 802.11b and IEEE 802.11g wireless clients. Make sure
that your notebook or computer’s wireless adapter supports one of these
standards.
Authentication by PIN
SECURITY INFO
WITHIN 2 MINUTES
Wireless Client
VMG
COMMUNICATION
Page 42 / 331
Chapter 4 Tutorials
VMG1312-B Series User’s Guide
42
4.4
Setting Up Multiple Wireless Groups
Company A wants to create different wireless network groups for different types of users as shown
in the following figure. Each group has its own SSID and security mode.
•
Employees in Company A will use a general
Company
wireless network group.
•
Higher management level and important visitors will use the
VIP
group.
•
Visiting guests will use the
Guest
group, which has a different SSID and password.
Company A will use the following parameters to set up the wireless network groups.
1
Click
Network Setting >
Wireless
to open the
General
screen. Use this screen to set up the
company’s general wireless network group. Configure the screen using the provided parameters
and click
Apply
.
COMPANY
VIP
GUEST
SSID
Company
VIP
Guest
Security Level
More Secure
More Secure
More Secure
Security Mode
WPA2-PSK
WPA2-PSK
WPA2-PSK
Pre-Shared Key
ForCompanyOnly
123456789
guest123
Company
VIP
Guest
Page 43 / 331
Chapter 4 Tutorials
VMG1312-B Series User’s Guide
43
2
Click
Network Setting >
Wireless
>
Guest/More AP
to open the following screen. Click the
Edit
icon to configure the second wireless network group.
3
Configure the screen using the provided parameters and click
Apply
.
Page 44 / 331
Chapter 4 Tutorials
VMG1312-B Series User’s Guide
44
4
In the
Guest
/
More AP
screen, click the
Edit
icon to configure the third wireless network
group.Configure the screen using the provided parameters and click
Apply
.
Page 45 / 331
Chapter 4 Tutorials
VMG1312-B Series User’s Guide
45
5
Check the status of
VIP
and
Guest
in the
Guest
/
More AP
screen. The yellow bulbs signify that the
SSIDs are active and ready for wireless access.
4.5
Configuring Static Route for Routing to Another
Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to
the Device’s LAN. The router may be used to separate two department networks. This tutorial
shows how to configure a static routing rule for two network routings.
19216811.live