VMG1312-B Series User’s Guide

31

C

HAPTER

3

Quick Start

3.1

Overview

Use the Quick Start screens to configure the Device’s time zone, basic Internet access, and wireless

settings.

Note: See the technical reference chapters (starting on

Chapter 4 on page 33

) for

background information on the features in this chapter.

3.2

Quick Start Setup

1

The Quick Start Wizard appears automatically after login. Or you can click the

Click Start

icon in

the top right corner of the web configurator

to open the quick start screens. Click

Next

.

Figure 12

Quick Start - Welcome

2

Enter your Internet connection information in this screen. The screen and fields to enter may vary

depending on your current connection type. Click

Next

.

Chapter 3 Quick Start

VMG1312-B Series User’s Guide

32

Figure 13

Quick Start - Internet Connection

3

Turn the wireless LAN on or off. If you keep it on, record the security settings so you can configure

your wireless clients to connect to the Device. Click

Save

.

Figure 14

Quick Start - Wireless

4

Your Device saves your settings and attempts to connect to the Internet.

VMG1312-B Series User’s Guide

33

C

HAPTER

4

Tutorials

4.1

Overview

This chapter shows you how to use the Device’s various features.

•

Setting Up an ADSL PPPoE Connection

, see

page 33

•

Setting Up a Secure Wireless Network

, see

page 36

•

Setting Up Multiple Wireless Groups

, see

page 42

•

Configuring Static Route for Routing to Another Network

, see

page 45

•

Configuring QoS Queue and Class Setup

, see

page 47

•

Access the Device Using DDNS

, see

page 51

•

Configuring the MAC Address Filter

, see

page 52

•

Access Your Shared Files From a Computer

, see

page 53

•

Using the Print Server Feature

, see

page 54

4.2

Setting Up an ADSL PPPoE Connection

This tutorial shows you how to set up an ADSL Internet connection using the Web Configurator.

If you connect to the Internet through an ADSL connection, use the information from your Internet

Service Provider (ISP) to configure the Device. Be sure to contact your service provider for any

information you need to configure the

Broadband

screens.

1

Click

Network Setting > Broadband

to open the following screen. Click

Add

New WAN

Interface

.

2

In this example, the DSL connection has the following information.

General

Name

MyDSLConnection

Chapter 4 Tutorials

VMG1312-B Series User’s Guide

34

3

Select the

Active

check box. Enter the

General

and

ATM PVC Configuration

settings as provided

above.

Set the

Type

to

ADSL over ATM

.

Choose the

Encapsulation

specified by your DSL service provider. For this example, the service

provider requires a username and password to establish Internet connection. Therefore, select

PPPoE

as the WAN encapsulation type.

Set the

IPv6/IPv4 Mode

to

IPv4 Only

.

4

Enter the account information provided to you by your DSL service provider.

5

Configure this rule as your default Internet connection by selecting the

Apply as Default Gateway

check box. Then select DNS as

Static

and enter the DNS server addresses provided to you, such as

192.168.5.2

(DNS server1)/

192.168.5.1

(DNS server2).

6

Leave the rest of the fields to the default settings.

7

Click

Apply

to save your settings.

Type

ADSL

Connection Mode

Routing

Encapsulation

PPPoE

IPv6/IPv4 Mode

IPv4

ATM PVC Configuration

VPI/VCI

36/48

Encapsulation Mode

LLC/SNAP-Bridging

Service Category

UBR without PCR

Account Information

PPP User Name

PPP Password

ABCDEF!

PPPoE Service Name

MyDSL

Static IP Address

192.168.1.32

Others

Authentication Method: AUTO

PPPoE Passthrough: Disabled

NAT: Enabled

IGMP Multicast Proxy: Enabled

Apply as Default Gateway: Enabled

VLAN: Disabled

Chapter 4 Tutorials

VMG1312-B Series User’s Guide

35