Zyxel VMG1312-B10D Router Manual PDF (Setup & Configuration Guide)

Page 46 / 331 Scroll up to view Page 41 - 45

Chapter 4 Tutorials

VMG1312-B Series User’s Guide

46

In the following figure, router

R

is connected to the Device’s LAN.

R

connects to two networks,

N1

(192.168.1.x/24) and

N2

(192.168.10.x/24). If you want to send traffic from computer

A

(in

N1

network) to computer

B

(in

N2

network), the traffic is sent to the Device’s WAN default gateway by

default. In this case,

B

will never receive the traffic.

You need to specify a static routing rule on the Device to specify

R

as the router in charge of

forwarding traffic to

N2

. In this case, the Device routes traffic from

A

to

R

and then

R

routes the

traffic to

B

.

This tutorial uses the following example IP settings:

Table 4

IP Settings in this Tutorial

DEVICE / COMPUTER

IP ADDRESS

The Device’s WAN

172.16.1.1

The Device’s LAN

192.168.1.1

IP Type

IPv4

Use Interface

VDSL/ppp1.1

A

192.168.1.34

N2

B

N1

A

R

N2

B

N1

A

R

Page 47 / 331

Chapter 4 Tutorials

VMG1312-B Series User’s Guide

47

To configure a static route to route traffic from

N1

to

N2

:

1

Log into the Device’s Web Configurator in advanced mode.

2

Click

Network Setting

>

Routing

.

3

Click

Add new Static Route

in the

Static Route

screen.

4

Configure the

Static Route Setup

screen using the following settings:

4a

Select the

Active

check box. Enter the

Route Name

as

R

.

4b

Set

IP Type

to

IPv4

.

4c

Type

192.168.10.0

and subnet mask

255.255.255.0

for the destination,

N2

.

4d

Select

Enable

in the

Use Gateway IP Address field

. Type

192.168.1.253

(

R

’s N1 address)

in the

Gateway IP Address

field.

4e

Select

VDSL/ppp1.1

as the

Use Interface

.

4a

Click

OK

.

Now

B

should be able to receive traffic from

A

. You may need to additionally configure

B

’s firewall

settings to allow specific traffic to pass through.

4.6

Configuring QoS Queue and Class Setup

This section contains tutorials on how you can configure the QoS screen.

R

’s N1

192.168.1.253

R

’s N2

192.168.10.2

B

192.168.10.33

Table 4

IP Settings in this Tutorial

DEVICE / COMPUTER

IP ADDRESS

Page 48 / 331

Chapter 4 Tutorials

VMG1312-B Series User’s Guide

48

Let’s say you are a team leader of a small sales branch office. You want to prioritize e-mail traffic

because your task includes sending urgent updates to clients at least twice every hour. You also

upload data files (such as logs and e-mail archives) to the FTP server throughout the day. Your

colleagues use the Internet for research, as well as chat applications for communicating with other

branch offices.

In the following figure, your Internet connection has an upstream transmission bandwidth of

10,000 kbps. For this example, you want to configure QoS so that e-mail traffic gets the highest

priority with at least 5,000 kbps. You can do the following:

•

Configure a queue to assign the highest priority queue (1) to e-mail traffic going to the WAN

interface, so that e-mail traffic would not get delayed when there is network congestion.

•

Note the IP address (192.168.1.23 for example) and/or MAC address (AA:FF:AA:FF:AA:FF for

example) of your computer and map it to queue 7.

Note: QoS is applied to traffic flowing out of the Device.

Traffic that does not match this class is assigned a priority queue based on the internal QoS

mapping table on the Device.

QoS Example

1

Click

Network Setting > QoS > General

and select

Enable

. Set your

WAN Managed Upstream

Bandwidth

to 10,000 kbps (or leave this blank to have the Device automatically determine this

figure). Click

Apply

.

Tutorial: Advanced > QoS

2

Click

Queue Setup

>

Add new Queue

to create a new queue. In the screen that opens, check

Active

and enter or select the following values:

•

Name

: E-mail

10,000 kbps

DSL

Your computer

IP=192.168.1.23

A colleague’s computer

Other traffic: Automatic classifier

and/or

MAC=AA:FF:AA:FF:AA:FF

Email traffic: Highest priority

Page 49 / 331

Chapter 4 Tutorials

VMG1312-B Series User’s Guide

49

•

Interface

:

WAN

•

Priority

: 1 (High)

•

Weight

: 8

•

Rate Limit

: 5,000 (kbps)

Tutorial: Advanced > QoS > Queue Setup

3

Click

Class Setup

>

Add new Classifier

to create a new class. Check

Active

and follow the

settings as shown in the screen below.

Page 50 / 331

Chapter 4 Tutorials

VMG1312-B Series User’s Guide

50

Tutorial: Advanced > QoS > Class Setup

Class Name

Give a class name to this traffic, such as

E-mail

in this example.

From

Interface

This is the interface from which the traffic will be coming from. Select

LAN1

for this

example.

Ether Type

Select

IP

to identify the traffic source by its IP address or MAC address.

IP Address

Type the IP address of your computer -

192.168.1.23

. Type the

IP Subnet Mask

if you

know it.

MAC Address

Type the MAC address of your computer -

AA:FF:AA:FF:AA:FF

. Type the

MAC Mask

if you

know it.

To Queue

Index

Link this to an item in the

Network Setting > QoS > Queue Setup

screen, which is the

E-

mail

queue created in this example.

Rate

Popular Zyxel Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share